Dulux Heritage Walls and Ceilings Velvet Matt Emulsion Paint 2.5L - Green

While Dulux Heritage Velvet Matt is washable, for optimal performance in high-humidity areas such as bathrooms or kitchens, a paint specifically formulated with enhanced mould and moisture resistance is generally recommended.

Coverage varies based on surface porosity and application method, but typically, 2.5L will cover approximately 30-35 square meters with two coats. Always check the product label for precise coverage rates.

For previously painted surfaces in good condition, a primer might not be necessary. However, for bare, new, or very porous surfaces (like new plaster), or when significantly changing colour, using a suitable primer or basecoat is highly recommended for best adhesion and finish.

The paint is usually touch dry in 2-4 hours. You should allow 4-6 hours before applying the second coat to ensure proper adhesion and an even finish. Full hardness and washability are achieved after several days.

No, this Dulux Heritage Velvet Matt Emulsion Paint is formulated specifically for interior walls and ceilings. For exterior surfaces, you should use a paint designed to withstand outdoor weather conditions.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is removed, then reshape bristles/pile and allow to dry.

Ensure thorough surface preparation, including cleaning and priming if needed. Stir the paint well before and during use. Apply in even coats, avoiding overloading your brush or roller, and maintain a wet edge.

Paint colour can vary slightly depending on lighting, surface texture, and the number of coats. Always test a small patch in an inconspicuous area and allow it to dry completely before painting the entire room. View the dried sample in different lights.

Ensure the paint has fully cured before attempting to clean it (this can take several days to a week). Use a soft, damp cloth with plain water or a very mild, non-abrasive detergent. Avoid harsh scrubbing or strong cleaning agents.

This typically indicates poor surface adhesion. Ensure surfaces are perfectly clean, dry, and free of dust, grease, and loose material before painting. A suitable primer should be used on bare, very porous, or difficult surfaces.