Dulux Heritage Walls and Ceilings Velvet Matt Emulsion Paint 2.5L - Blossom

This paint features a luxurious velvet matt finish, which provides a soft, elegant look and helps to minimize reflections.

While the paint is washable, for areas with high moisture and condensation like bathrooms and kitchens, paints specifically designed for those environments (e.g., mould-resistant formulas) are generally recommended for optimal longevity. This paint is best suited for walls and ceilings in living rooms, bedrooms, and hallways.

Info needed: Typical coverage for 2.5L of emulsion paint is approximately 25-30 square meters per coat, but this can vary depending on surface porosity and application method. Always refer to the product label for specific coverage rates.

While not always mandatory, using a suitable primer is highly recommended, especially on new, bare, or previously unpainted surfaces. A primer helps achieve better adhesion, a more uniform finish, and can improve paint coverage and color depth.

Info needed: Drying times can vary based on temperature, humidity, and ventilation. Generally, this type of emulsion paint is touch dry in 2-4 hours and ready for a second coat in 4-6 hours. Full cure can take up to 7-14 days. Always consult the product label for precise drying times.

No, this Dulux Heritage Walls and Ceilings Velvet Matt Emulsion Paint is formulated for interior use on walls and ceilings only. It is not designed to withstand exterior weather conditions.

Ensure the surface was properly prepared (clean, dry, smooth). Apply paint evenly using consistent pressure and avoid overworking the wet paint. Allow adequate drying time between coats.

Paint color can appear different in various lighting conditions. Always test a small area first. Ensure sufficient coats have been applied, as final color depth appears after full coverage and drying. Check that the paint was thoroughly stirred before use.

Ensure the surface is properly primed, especially if painting over a dark color or highly porous material. Apply paint at the recommended thickness; thin application can reduce coverage. Check if the product was properly stirred.

This often indicates poor surface preparation. Ensure the surface is clean, dry, and free of loose paint, dust, or grease. Old, flaking paint should be scraped and sanded smooth before applying new paint.