Dulux Heritage Chalk White Velvet Matt Wall Paint, 2.5L - White

For best results and full depth of colour, we typically recommend applying two coats. Allow sufficient drying time between each coat.

This paint is designed for general interior walls and ceilings. While washable, for high-humidity areas like bathrooms and kitchens, paints specifically formulated with enhanced moisture and mould resistance are often recommended. If using this product, ensure good ventilation.

Touch dry time is typically within 2-4 hours. Allow 4-6 hours before applying a second coat. These times can vary depending on temperature and humidity.

A primer is generally recommended for new, bare, porous, or previously unpainted surfaces to ensure optimal adhesion and a consistent finish. For previously painted surfaces in good condition, priming may not be necessary after proper preparation.

Gently wipe marks or dirt with a soft, damp cloth using mild detergent. Avoid harsh scrubbing or abrasive cleaning agents to protect the velvet matt finish. Promptly clean spills to prevent staining.

Info needed: Typical coverage rate per litre. (Please refer to the product label for specific coverage information, as it can vary based on surface porosity and application method).

No, this Dulux Heritage Velvet Matt Emulsion is specifically formulated for interior walls and ceilings only.

Ensure the paint is thoroughly stirred before and during use. Apply evenly using consistent brush or roller strokes. Ensure sufficient drying time between coats and apply at least two coats for optimal coverage and depth of colour.

Thoroughly clean and prepare the surface by removing all dust, grease, and loose particles. For previously painted glossy surfaces, light sanding is recommended to create a 'key' for better adhesion. A suitable primer may be necessary for very porous or difficult surfaces.

Use high-quality brushes or rollers appropriate for emulsion paint. Maintain a 'wet edge' during application by working in manageable sections. Avoid overworking the paint once it starts to dry.

Ensure the paint has been well-stirred. Apply the paint at the recommended spreading rate, ensuring not to stretch it too far. Allow adequate drying time before applying a second coat. Most surfaces benefit from two coats for a rich, even finish.