Crown Breatheasy Walls & Ceilings Silk Emulsion Paint 2.5L - Cream

The paint is touch dry in approximately 2 hours. However, allow at least 4 hours between coats for best results.

Yes, Crown Breatheasy Silk Emulsion is suitable for bathrooms, but ensure adequate ventilation to prevent moisture build-up.

Coverage depends on the surface and application method. A 2.5L tin typically covers up to 35 square meters. It is always best to measure your space to determine how much paint you will need.

This paint has a subtle sheen, providing a slight sheen finish.

Clean the surface, remove loose particles, fill any holes or cracks, and sand smooth. Ensure the surface is dry before painting.

Crown Breatheasy Silk Emulsion provides a wipeable finish with a subtle sheen.

The Breatheasy formulation is 99% solvent-free, reducing odour during application and making it a more pleasant experience.

Ensure thorough stirring before application. Apply a second coat, allowing sufficient drying time between coats. Make sure the surface is properly prepared.

While Breatheasy is 99% solvent-free, ensure proper ventilation during and after application. This will reduce any lingering odour.

Ensure the surface is clean, dry, and free from grease or dirt. If necessary, lightly sand the surface to improve adhesion. Use a suitable primer if painting over a glossy surface.

Colour can vary depending on lighting conditions. Allow the paint to dry completely to see the true colour. If the difference is significant, consider applying an additional coat.