Crown Breatheasy Walls & Ceilings Matt Emulsion Paint 2.5L - Fairy Dust

This paint is specifically formulated for use on indoor walls and ceilings.

Typically, two coats are recommended for optimal coverage and color depth. However, this may vary depending on the original surface color and condition.

Info needed: specific touch-dry and recoat times. Generally, most emulsion paints are touch-dry within 1-2 hours and ready for a second coat in 2-4 hours, but always refer to the label for precise timings.

While tough and durable, matt emulsions are generally less resistant to scrubbing than silk or satin finishes. For light marks, gently wipe with a damp, soft cloth.

A primer is recommended for new plaster, highly porous surfaces, or when making a significant color change to ensure better adhesion and a more even finish.

While durable, this is a standard matt emulsion. For high-humidity areas like bathrooms and kitchens, paints specifically designed for those environments (e.g., with mold-inhibiting properties) are often recommended for better long-term performance.

Info needed: specific coverage rate in square meters per liter. Coverage typically depends on the surface porosity and application method.

Store any leftover paint in its original container with the lid tightly sealed, in a cool, dry place away from direct sunlight and frost. Do not allow it to freeze.

Ensure consistent paint application by maintaining a wet edge and rolling in one direction. Avoid overspreading the paint or applying too thinly. Allow adequate drying time between coats.

Ensure the surface is properly prepared, clean, and dry. For significant color changes or porous surfaces, a primer or an additional coat may be necessary. Ensure paint is thoroughly stirred before use.

While 99% solvent-free, some faint odor may remain. Ensure the room is well-ventilated during and after painting. Keep windows open for several hours or days to allow for complete off-gassing.