Crown Breatheasy Walls & Ceilings East Village Matt Emulsion Paint 2.5L - Multicolor

For optimal results, apply two coats of Crown Breatheasy Matt Emulsion Paint, allowing sufficient drying time between coats.

While suitable for interior use, it is not recommended for areas with high moisture or direct water contact. Consider a paint specifically designed for bathrooms.

Drying times vary depending on environmental conditions (temperature, humidity), but typically, it takes 2-4 hours for the paint to dry to the touch and 12-24 hours for it to fully cure. Refer to the product label for specific drying times.

You'll need paintbrushes or rollers, a paint tray, a stirring stick, and painter's tape to protect areas you don't want to paint.

Clean brushes and rollers immediately after use with warm, soapy water. Rinse thoroughly until the water runs clear.

Yes, you can gently wipe the surface with a damp cloth to clean off marks and spills.

The paint comes in a variety of colours. Refer to the product packaging or your retailer for the specific colour range.

While not always necessary, using a primer can improve adhesion, especially on porous surfaces or when changing colours significantly.

Ensure thorough stirring before application. Apply an even coat and avoid over-brushing. Apply a second coat after the first has dried completely.

Ensure proper ventilation during application and drying. The smell should dissipate once the paint is fully dry.

Make sure the surface has been properly prepared. Consider using a primer before applying the paint, especially on porous surfaces or when changing colours significantly.