Dulux Weathershield Exterior Metal & Wood Paint - Buckingham Green - 2.5L

This paint is specifically designed for exterior metal and wood surfaces, such as doors, window frames, gates, and railings.

A 2.5L tin of Dulux Weathershield Exterior Metal & Wood Paint will cover approximately 18 m² on average.

You should allow a minimum of 16 hours for the paint to dry before applying a second coat.

It provides a long-lasting, high gloss finish.

Yes, it is made with protective technology to be resistant to cracking and mould, offering long-lasting protection.

Since this is a solvent-based paint, you should clean your brushes and equipment immediately after use with a suitable solvent cleaner like white spirit.

No, this paint is formulated specifically for exterior use on metal and wood surfaces.

Ensure application conditions are optimal: avoid painting in very high humidity or low temperatures. Apply thin, even coats. Provide good ventilation if possible. Note the 16-hour recoat time is expected.

Ensure the surface was properly prepared and smooth before painting. Apply paint evenly and avoid over-brushing. Use a good quality brush appropriate for gloss paints.

Thoroughly stir the paint before and during application to ensure pigments are well mixed. Ensure the recommended number of coats (typically two) has been applied, allowing adequate drying time between coats. Proper surface preparation and priming are also key.

This often indicates moisture or contamination on the surface before painting. Ensure the surface is completely dry and clean. Remove any loose paint, sand the area, and reapply after thorough cleaning and drying.

While the paint is mould-resistant, ensure any existing mould or mildew was thoroughly removed and treated with an appropriate fungicidal wash before painting. Proper surface preparation is crucial for the paint's protective properties to work effectively.