Dulux Easycare Bathroom Sapphire Salute Soft Sheen Wall Paint, 2.5L - Blue

Yes, Dulux Easycare Bathroom paint is formulated for both walls and ceilings in bathrooms.

Drying times can vary. Typically, it is touch-dry in 1-2 hours and recoatable after 4 hours. Always refer to the specific instructions on the paint can.

While it is designed for bathrooms, its washable and stain-resistant properties can make it suitable for kitchens. However, it does not have specific kitchen-rated features like extreme grease resistance.

Proper surface preparation is key. Ensure walls are smooth, clean, and free from imperfections before painting. Applying two even coats will enhance the smoothing finish.

A 2.5L can typically covers approximately 12-13 square meters per litre, meaning one coat should cover around 30-32.5 square meters. Coverage may vary based on surface porosity and application method.

Dulux Easycare paints are generally formulated with low VOCs. While there may be a slight odour during application, it is typically minimal and dissipates quickly once dry, especially with good ventilation.

Ensure the surface was properly prepared and primed. Stir the paint thoroughly and apply a second coat if necessary. Use a high-quality roller or brush.

Ensure the bathroom has adequate ventilation. Clean the affected area thoroughly with a mould remover and reapply paint, ensuring the underlying cause of condensation is addressed.

This can be due to insufficient stirring, uneven application, or inadequate preparation. Ensure the paint is well-mixed and apply in smooth, even strokes. Check for any remaining dust or debris on the surface.

While the paint is washable, some stubborn stains may require a gentle detergent. Avoid aggressive scrubbing. Ensure the paint has fully cured (which can take several weeks) before attempting vigorous cleaning.