Dulux Weathershield Exterior Gloss - Royal Berry - 750ml

Touch dry in 4-6 hours. Allow 16-24 hours before applying a second coat. Drying times can vary based on temperature and humidity.

Yes, for guaranteed 6-year durability, especially on bare wood or metal, proper priming with an appropriate Dulux Weathershield Exterior Primer is essential. This ensures adhesion and a long-lasting finish.

This product is specifically formulated for exterior use and is not recommended for indoor applications. Its properties are optimized for weather resistance, which may not be suitable for interior environments.

It is recommended for exterior wood and metal surfaces, particularly front doors and windows, that have been properly cleaned and primed.

Clean brushes and rollers immediately after use with a suitable brush cleaner or white spirit. Follow the instructions on the cleaner for best results.

A 750ml tin covers approximately 12 square meters per coat. Coverage may vary depending on the porosity and texture of the surface.

The 6-year weathering durability is guaranteed provided the surfaces are in good condition and the system (including proper preparation and priming) is correctly applied. Failure to follow preparation guidelines may affect durability.

Ensure adequate ventilation and suitable temperature for drying. High humidity or low temperatures can prolong drying times. Apply thin, even coats, avoiding over-application.

Use a good quality synthetic brush. Avoid over-brushing the paint. Apply in smooth, even strokes, allowing the paint to flow and level naturally. Ensure the paint is at room temperature.

This often indicates poor surface preparation. Ensure the surface was thoroughly cleaned, dry, and properly primed. Remove all loose paint, sand, clean, and re-prime before repainting.

Ensure the paint was thoroughly stirred before and during application. The final colour can also be influenced by the surface's original colour, so proper priming is essential.

Apply enough paint to achieve full coverage and allow it to level. Ensure consistent application thickness and avoid applying too thinly. Two coats are generally recommended for an even, opaque finish.