Setup, Compatibility & Care
Surface Preparation (Setup)
Proper surface preparation is crucial for achieving the 15-year protection. Follow these steps:
- Clean the Surface: Ensure all loose dirt, dust, and debris are removed. Use a stiff brush or power washer (if suitable for the substrate).
- Remove Old Paint: Scrape off any loose, flaking, or peeling paint. If the existing paint is sound, clean thoroughly.
- Address Mould/Algae: Treat any areas affected by mould or algae with a suitable fungicidal wash or masonry cleaner. Allow to dry completely.
- Repair Imperfections: Fill any major cracks, holes, or defects with an appropriate exterior filler. Allow to dry and sand smooth if necessary. The paint's flexible film will cover *hairline* cracks, but larger ones need repair.
- Primer (Optional/Recommended): For bare, porous, or previously unpainted surfaces, or if there's a significant color change, apply a suitable masonry primer or a diluted first coat of Weathershield Smooth Masonry Paint (dilution ratio: Info needed: [check product label for specific primer/dilution instructions]). Allow to dry.
Compatibility
This paint is designed for use on most sound, dry, exterior masonry surfaces, including:
- Render
- Roughcast
- Pebbledash
- Concrete
- Building blocks
- Brickwork (note: not suitable for common fletton brick)
- Exterior grade cement particle boards
Ensure the surface is structurally sound and free from excessive dampness or efflorescence.
Application & Care
- Stir Well: Before use, stir the paint thoroughly to ensure uniform consistency and color.
- Application Tools: Use a good quality exterior masonry brush or roller. A roller can provide a smoother finish and faster application over large areas.
- Apply Evenly: Apply 2 coats, ensuring even coverage. Allow sufficient drying time between coats (typically 2-4 hours, but always check product label for exact times based on conditions).
- Weather Conditions: Apply in dry conditions, ideally between 10°C and 30°C, and avoid applying in direct strong sunlight or if rain is forecast within 30 minutes of application.
- Tool Care: Clean brushes and rollers immediately after use with warm soapy water.
- Paint Storage: Store any leftover paint in its original container, tightly sealed, in a cool, dry, frost-free place, out of reach of children.