Dulux Quick Dry Satinwood - Grey - 750Ml

No, Dulux Quick Dry Satinwood is self-undercoating, meaning you do not need a separate primer or undercoat for most prepared wood and metal surfaces. Just ensure the surface is clean, dry, and lightly sanded.

Typically, 1-2 coats are sufficient for full coverage and a durable finish. Darker existing colors may require two coats.

The paint is quick-drying. Refer to the product label for specific recoat times, but generally, you can apply a second coat within a few hours. Touch dry time is usually much quicker.

No, this specific formulation of Dulux Quick Dry Satinwood is designed for interior wood and metal surfaces only. It is not recommended for exterior use.

Clean your tools immediately after use with warm, soapy water. Rinse thoroughly until all paint residue is gone, then reshape and allow to air dry.

> Info needed: Specific coverage per liter/can. Check product label for precise coverage rates. Generally, a 750ml can cover a small to medium-sized door or several meters of skirting board with two coats, depending on the surface porosity.

Ensure the surface is properly prepared and free of debris. Apply paint in thin, even coats, brushing in one direction. Avoid overworking the paint or applying too thickly.

Ensure good ventilation in the area. Check ambient temperature and humidity; paint dries best in moderate conditions. Ensure previous coats are fully dry before applying the next. Avoid applying paint too thickly.

Thoroughly clean and lightly sand the surface before painting to create a good key. Ensure all old, loose paint is removed. Do not apply over unstable or greasy surfaces.

While low odor, ensure continuous good ventilation in the painted area for several hours or days after application. Open windows and doors.