Dulux Weathershield Exterior Metal & Wood Paint - Green Glade

This paint is designed for exterior metal and wood surfaces only.

A 750ml tin will cover up to 18 m² on average, depending on the surface porosity and application method.

For best results and full colour depth, two coats are recommended.

You can recoat after 6 hours, provided the first coat is dry to the touch.

Yes, it contains fungicides that inhibit mould growth on the painted surface.

No, this specific product is formulated for exterior use on metal and wood.

It provides a tough, shiny satinwood finish.

As it is a water-based paint, clean your brushes and equipment with clean water immediately after use.

This often indicates poor surface preparation. Ensure the surface was thoroughly cleaned, dry, and free from grease, dust, or loose paint before application. Glossy surfaces should be lightly sanded to create a key.

Ensure the paint was thoroughly stirred before and periodically during application. Apply an even layer, avoiding over-brushing or applying too thickly in one area. Check that the recommended drying time of 6 hours was observed between coats.

While the paint contains fungicides, persistent mould can be an issue. Ensure the surface was completely free of mould before painting. For stubborn mould, a pre-treatment with a fungicidal wash might be necessary. Also, ensure the area has good ventilation and drainage to prevent future mould growth.

Drying times can be affected by environmental factors. High humidity, low temperatures, or poor ventilation can extend drying times. Ensure you are painting in suitable weather conditions and that coats are not applied too thickly.