Best current price£3.74from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£3.74Visit shop Maxicolor Red Spray Paint Gloss Carmine 400Ml Mx3002
Visit shop
B&Q£8.17Visit shop B&Q - Mx3000 Spray Gloss Flame Red Ral3000 400Ml Mxcmx3000
Visit shop12 offers from £3.74 - £9.99
View price history by clicking the chart icon.
This guide is for DIY enthusiasts and professionals looking for a vibrant, high-coverage spray paint for various surfaces. The MAXICOLOR Spray Gloss in Flame Red offers excellent adhesion and a durable gloss finish for both indoor and outdoor projects. A potential limitation to consider is the need for proper surface preparation to achieve optimal results.
| Colour | Red |
|---|---|
| Model Part Number | MXCMX3000 |
| Brand | MAXICOLOR |
MAXICOLOR Spray Gloss is suitable for treated and untreated wood, metal, aluminum, glass, stone, and plastic.
Drying times can vary based on temperature, humidity, and application thickness, but typically it is touch-dry within 15-20 minutes and fully cured within 24 hours.
Yes, MAXICOLOR Spray Gloss is formulated for both indoor and outdoor use, offering durable protection.
For best results and full coverage, it is generally recommended to apply 2-3 thin, even coats, allowing adequate drying time between each coat.
Overspray should be cleaned up immediately with a suitable solvent before it dries. For tools or hands, use soap and water once the paint is still wet.
While the paint offers good adhesion, using a primer designed for the specific surface material (e.g., metal primer, plastic primer) can significantly improve adhesion, durability, and color finish.
A 400ml can typically covers approximately 2 square meters, depending on the surface and application thickness.
Ensure the can is thoroughly shaken. Check for blockages in the nozzle and clear if necessary. Maintain an even distance from the surface and use consistent, sweeping motions.
The surface may not have been adequately prepared. Ensure it is clean, dry, and free from contaminants. Sanding and priming might be required for optimal adhesion.
Apply paint in thin, even coats. Avoid applying too much paint at once. Hold the can at the recommended distance and use a steady motion.
Always invert the can after painting and spray for a few seconds to clear the nozzle. If already clogged, try soaking the nozzle in a suitable solvent.
Setup: Ensure the surface to be painted is clean, dry, and free from grease, dirt, or rust. For best adhesion, lightly sand smooth surfaces and apply an appropriate primer if necessary. Shake the can vigorously for at least two minutes before use, and periodically during application. Test spray on an inconspicuous area first.
Compatibility: This spray paint is designed for use on treated and untreated wood, metal, aluminum, glass, stone, and plastic. Always check product compatibility for specialized materials or existing finishes.
Care: Store cans in a cool, dry place away from direct sunlight and heat sources. After use, clear the nozzle by inverting the can and spraying for a few seconds until clear propellant emerges. Clean up any spills or overspray immediately with a suitable solvent.
