Best current price£6.41from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£6.41Visit shop Ronseal Black 39180 Direct To Metal Paint Satin 250Ml
Visit shop
B&Q£12.35Visit shop B&Q - Direct To Metal Paint Satin Black 250Ml
Visit shopB&Q£15.01Visit shop B&Q - Direct To Metal Paint Matt Black 250Ml
Visit shop59 offers from £6.41 - £63.65
View price history by clicking the chart icon.
Ronseal Direct to Metal Paint is designed for DIYers and professionals seeking a quick and durable solution for metal surfaces. Its key benefit is the 15-year protection with minimal preparation, as it can be applied directly to rust without a primer. A caveat is to always follow the specific directions on the tin for optimal, long-lasting results. This water-based paint offers a tough, low-odour finish and is shower-proof in just 30 minutes.
| Colour | Black |
|---|---|
| Model Part Number | 39214 |
| Brand | Ronseal |
No, Ronseal Direct to Metal Paint is specifically formulated to be applied directly to metal surfaces, including those with existing rust, without the need for a primer. This significantly speeds up the preparation process.
This paint is suitable for a wide range of metal surfaces including cast iron, aluminium, and steel. It can also be used on wood and previously painted surfaces.
The paint is shower-proof in 30 minutes. For recoating, allow at least 4 hours between coats. Full drying and hardening will take longer depending on conditions.
The paint provides coverage of up to 8m² per litre, depending on the surface porosity and application thickness.
Yes, it is suitable for cast iron radiators. For surfaces that reach very high temperatures, always check the specific product guidelines or test a small area.
As this is a water-based paint, brushes and equipment can be cleaned easily with water immediately after use.
This particular variant is a matt finish. Ronseal also offers Direct to Metal paint in satin and gloss finishes in various colours.
The paint offers up to 15 years of protection when applied correctly according to the instructions on the tin.
Ensure the surface was properly cleaned and free from grease/oil before application. Lightly abrade very shiny surfaces. Verify that application conditions (temperature, humidity) were within recommended ranges and that sufficient drying time was allowed between coats.
Stir the paint thoroughly before and during use. Apply thin, even coats using a good quality brush or roller. Avoid overworking the paint. Ensure consistent application technique.
This can occur in humid conditions or if applied too thickly. Ensure adequate ventilation. Apply thinner coats in the future. If already applied, allow significantly more time in a warm, dry environment for curing. Avoid applying additional coats until the previous one is fully dry.
Ensure all loose rust was removed and that the paint was applied directly to stable rust. For heavily rusted areas, multiple coats may be necessary to fully encapsulate the rust. Check for any missed spots.
Setup:
Compatibility:
Care:
