Ronseal Direct To Metal Paint - Gold, Gloss - 250ml
Our 15 Year Protection Direct to Metal Paint gives you a tough and durable finish to your metal. I...Our 15 Year Protection Direct to Metal Paint gives you a tough and durable finish to your metal. It takes minimal prep, doesn't need a primer. Ronseal Direct to Metal Paint is perfect if you want to get the job of painting your metal surface done quickly with no fuss. It comes with 15 year protection and gives you a tough, durable finish. The prep time is minimal, because you don't need a primer and you can apply it direct to rust. This is a low odour, water based paint that's shower proof in 30 minutes. The choice of colours is great, too. You can keep it traditional or add a touch of colour, safe in the knowledge that your metal will be well protected for years to come. Always follow the directions exactly as they appear on the tin to ensure you benefit from the 15 year protection. Features: Use on cast iron, aluminium, wood and metal Coverage up to 8m2 per litre Choice of finishes available Showerproof in 30 minutes Can be applied directly to rust Minimum prep time required Fast recoat time 15 year protection.
Ronseal Direct to Metal Paint Gold Satin 250ml RSLDTMGS250Free delivery in 1–3 days£15.27Visit shop →
Product Information
Full details
This guide helps you get the most out of Ronseal Direct To Metal Paint. It's ideal for anyone looking to protect and beautify metal surfaces with minimal preparation. The paint provides a tough, durable, and long-lasting finish, but it's essential to follow preparation instructions carefully for optimal results.
All features
Colour
Gold
Model Part Number
39194
Brand
Ronseal
Extended Product Information
FAQs
Do I need a primer?
No primer is typically required, as this paint is designed to be applied directly to metal. However, ensure proper surface preparation.
How many coats should I apply?
For optimal protection and finish, apply two coats.
What is the drying time?
Drying times can vary. Refer to the product label for specific drying times under various conditions, but usually is dry to touch within a few hours and fully dry in 24 hours.
Can I use this paint outdoors?
Yes, Ronseal Direct To Metal Paint is suitable for both indoor and outdoor use.
How do I clean the application tools?
Clean brushes and rollers with the appropriate solvent, as recommended on the product label, after use.
What surfaces can I use this paint on?
It is suitable for use on a variety of metal surfaces, such as gates, railings, and metal furniture.
Is this paint rust-resistant?
Yes, the paint provides protection against rust when applied to a properly prepared surface.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free from any contaminants. Lightly sand the surface to create a key.
Paint is peeling or flaking.
Remove loose paint and ensure proper surface preparation before reapplying. Consider using a primer if necessary.
Paint is taking a long time to dry.
Ensure the application environment has adequate ventilation. High humidity and low temperatures can increase drying times.
Uneven finish.
Apply the paint in thin, even coats, and avoid over-brushing. Apply two coats for best results.
Pros and Cons
Pros
Easy to apply directly to metal surfaces.
Offers 15 years of protection.
Provides a durable and long-lasting finish.
Requires minimal surface preparation.
Available in a variety of colors.
Cons
May require multiple coats for optimal coverage.
Surface preparation is still important for best results.
Specific colors may have limited availability.
Not suitable for all types of metal or applications.
Setup, Compatibility & Care
Setup
Surface Preparation: Clean the metal surface thoroughly to remove any dirt, grease, or loose rust. Use a wire brush or sandpaper to remove loose rust. Ensure the surface is completely dry.
Application: Stir the paint thoroughly before use. Apply the paint evenly using a brush or roller. Apply two coats, allowing the first coat to dry completely before applying the second.
Drying Time: Allow the paint to dry completely. Drying times can vary depending on temperature and humidity.
Compatibility
Suitable Metals: Compatible with various metal surfaces, including steel, iron, and other ferrous metals.
Not Recommended For: Avoid applying to non-ferrous metals without suitable primers.
Care
Cleaning: Clean painted surfaces with a mild detergent and water. Avoid using abrasive cleaners.
Maintenance: Regularly inspect painted surfaces for any signs of damage and touch up as needed. Reapply paint as needed.