Ronseal 15 Year Direct To Metal Paint - Satin - White - 750Ml

No, the key feature of this paint is that it can be applied directly to rust, eliminating the need for a separate primer.

It is suitable for most metal surfaces, including cast iron and aluminium, as well as wood.

Two coats are recommended for good coverage and protection. For rusty metal or to achieve the ultimate 15-year durability, three coats are advised.

The paint is touch dry in 30 minutes and showerproof in 30 minutes. Allow 2 to 4 hours between coats.

Yes, you can spray the paint. It is recommended to dilute it with approximately 10% water for spray application.

Clean brushes and rollers immediately after use with warm, soapy water.

The '15 Year Protection' refers to the expected lifespan of the coating under normal conditions when applied correctly with the recommended number of coats, providing a durable barrier against rust and corrosion.

Ensure the surface was clean, dry, and free from grease before application. For best results, prepare rusty surfaces by removing loose material with a wire brush or sandpaper.

Stir paint thoroughly before and during use. Apply thin, even coats, avoiding overloading the brush or roller. For a smoother finish, consider diluting for spray application if appropriate for the surface.

Ensure application occurs within the recommended temperature and humidity conditions. Avoid applying excessively thick coats, as this can prolong drying times.

Verify that the previous coat is properly dry to the touch and recoatable according to the specified time (2-4 hours). Environmental conditions can affect drying times.