Best current price£3.74from Blueperry agriculture (UK)
Shopping.co.uk recommended and popular offers
Blueperry agriculture (UK)£3.74Visit shop Maxicolor Yellow/Green Spray Paint Gloss 400Ml Mx6018
Visit shop
eBay£5.98Visit shop Maxicolor Gloss Gold Yellow RAL Spray Paint 400ml Wood Metal Plastic Fast Drying
Visit shop
B&Q£8.17Visit shop B&Q - Mx1004 Spray Gloss Gold Yellow Ral1004 400Ml Mxcmx1004
Visit shop19 offers from £3.74 - £9.99
View price history by clicking the chart icon.
The MaxiColor Spray Paint in Yellow Green RAL6018 is designed for DIY enthusiasts and professionals seeking a versatile, high-coverage coating for various surfaces. Its key benefit is excellent adhesion and minimal dripping, suitable for both indoor and outdoor applications. A potential caveat is the need for proper surface preparation to ensure optimal results.
| Colour | Yellow |
|---|---|
| Model Part Number | MXCMX6018 |
| Brand | MAXICOLOR |
MaxiColor Spray Paint is suitable for treated and untreated wood, metal, aluminum, glass, stone, and plastic.
Drying times can vary based on temperature, humidity, and application thickness. Typically, it is touch-dry within 15-30 minutes and fully cured within 24 hours.
Yes, MaxiColor Spray Paint is formulated for both indoor and outdoor use, offering durability against various environmental conditions.
If the nozzle is clogged, try rotating it to a clean port. If that doesn't work, remove the nozzle and soak it in a suitable solvent (like paint thinner or acetone), then rinse thoroughly. Always replace the nozzle securely before spraying again.
It is recommended to apply 2-3 thin, even coats for best results, allowing adequate drying time between each coat. The number of coats may vary depending on the surface and desired finish.
Priming is recommended for certain surfaces to ensure optimal adhesion and durability, especially for bare metal, plastics, or when covering very dark or uneven colors. Always refer to surface-specific preparation guidelines.
A 400ml can typically covers approximately 1.5 to 2 square meters with two thin coats, but this can vary depending on the surface porosity and application technique.
Ensure the nozzle is not clogged. Try rotating the nozzle or cleaning it with a solvent as per manufacturer instructions. Shake the can more vigorously.
Apply paint in thinner coats. Reduce the distance between the can and the surface slightly, or increase the speed of your passes. Ensure the can is held at an even distance.
The surface may not have been properly prepared. Ensure it is clean, dry, and free from contaminants. Lightly re-sand and consider using a suitable primer.
Check that the nozzle is properly attached. Ensure the can has been shaken sufficiently. Warm the can slightly in lukewarm water if it's been stored in a cold environment.
Preparation is Key: Before application, ensure the surface is clean, dry, and free from dust, grease, and rust. For optimal adhesion and finish, lightly sand surfaces like wood and metal. For non-porous materials like glass or certain plastics, a suitable primer may be required. Always test the paint on an inconspicuous area first.
Application: Shake the can vigorously for at least two minutes before and occasionally during use. Hold the can upright, approximately 25-30 cm from the surface. Apply in thin, even coats, using a steady back-and-forth motion. Overlap each stroke slightly. Avoid applying excessively thick coats, which can lead to drips.
Compatibility: This paint is suitable for wood, metal, aluminum, glass, stone, and plastic. However, compatibility with specific types of plastics, especially flexible ones, should be tested. For best results on bare metal, a primer designed for metal protection is recommended.
Care: Once fully cured, the painted surface can be cleaned with a soft, damp cloth. Avoid abrasive cleaners or solvents, which can damage the finish. For outdoor use, the paint offers protection, but prolonged exposure to harsh weather may eventually affect the appearance.
