Ft Paints Water-Based Polyurethane Paint For Metal Facades - White
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for professionals and DIY enthusiasts working on vehicles, machinery, and metal structures requiring a durable, high-performance coating. The key benefit is achieving a tough, semi-gloss finish with excellent resistance to mechanical and chemical stress, UV, and weather. A potential caveat is its 2K formulation, requiring careful mixing and application. This premium waterborne polyurethane coating offers superior protection in demanding environments.
All features
| Colour | White |
|---|---|
| Model Part Number | FT-WPU2425-P3.65L-H0.91L-T0.94L-S-MF |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the mixing ratio for the RT 2K PU Topcoat?
The specific mixing ratio for the paint and hardener is detailed on the product's technical data sheet. Always refer to this document for precise measurements.
How long is the pot life after mixing?
The pot life (or working time) of the mixed product is limited and varies depending on temperature. Consult the technical data sheet for the exact pot life.
Can this be applied with a brush or roller?
While primarily designed for spraying, specific application methods like brush or roller might be possible with adjustments to viscosity and technique. However, for best results and finish quality, spraying is recommended. Always test on a small area first.
What is the recommended thickness for the coating?
Recommended dry film thickness (DFT) will be specified on the technical data sheet. Applying too thick or too thin can affect performance and appearance.
How should I store the unmixed components?
Store unmixed paint and hardener in their original, tightly sealed containers in a cool, dry, well-ventilated area, away from direct sunlight and sources of ignition.
What is the shelf life of the product?
The shelf life of unopened components is typically indicated on the packaging. Once mixed, the product has a limited pot life and should be used promptly.
Is this paint suitable for automotive finishes?
Yes, it is engineered for vehicles and offers excellent durability and resistance, making it suitable for automotive and machinery applications where high performance is required.
Troubleshooting
Uneven finish or "orange peel"
Adjust spray gun settings (pressure, fluid tip), maintain consistent distance and speed, and ensure correct viscosity and temperature. Check for adequate ventilation.
Coating not drying properly
Verify correct mixing ratio of paint and hardener. Ensure application within recommended temperature and humidity range. Check for contamination. Ensure sufficient air circulation.
Poor adhesion to substrate
Ensure the surface was properly cleaned, degreased, and primed with a compatible WEP primer. Sanding may be required for certain substrates.
Runs or drips during application
Apply thinner coats, allow appropriate flash-off time between coats, and reduce spray gun flow if necessary. Maintain correct gun distance.
Pros and Cons
Pros
- Exceptional resistance to chemicals, solvents, and scratches.
- Excellent UV and weatherproofing for outdoor durability.
- Suitable for high-stress applications on vehicles and machinery.
- Fast drying times improve workflow efficiency.
- Good thermal resistance up to 180°C.
- Waterborne formula offers environmental benefits compared to solvent-based alternatives.
Cons
- Requires proper mixing of two components (paint and hardener) for activation.
- 2K systems often necessitate specialized application equipment and safety precautions.
- Extended cure time of 7-8 days means the surface is vulnerable to damage until fully hardened.
- Satin matt finish may not be preferred for all aesthetic applications.
- May require specific WEP primers for optimal adhesion and performance.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) system. The paint and hardener must be mixed in the correct ratio as specified by the manufacturer before application. Use clean, dedicated mixing containers and tools. Ensure the substrate is properly prepared, clean, dry, and free from contaminants. It is recommended to use WEP Primers for optimal adhesion.
Application: Apply using standard spraying equipment (e.g., HVLP spray gun). Maintain consistent application technique for even coverage. Refer to the product's technical data sheet for specific mixing ratios, application viscosity, spray settings, and recommended ambient temperature ranges.
Compatibility: Primarily designed for use with WEP Primers. Ensure any previously coated surfaces are compatible or properly prepared. Not intended for use on plastics unless a suitable primer is applied.
Care: Once fully cured, the surface is easy to clean. Use a mild detergent and water with a soft cloth or sponge. Avoid abrasive cleaners or tools that could scratch the finish. Regularly remove dirt and grime to maintain appearance and longevity. Always wear appropriate personal protective equipment (PPE) during application.