Ronseal Direct to Metal Paint - Black Gloss - 750ml
Ronseal Direct to Metal Paint is a high-quality, water-based paint that provides a tough and durab...Ronseal Direct to Metal Paint is a high-quality, water-based paint that provides a tough and durable finish to metal. It doesn't need a primer and can be applied directly to rust. Quick recoat time and is showerproof in 30 minutes. Paints up to 8m2 per litre. It provides 15-years of protection. This paint offers 15-year protection and can be applied directly to rust with minimal preparation. It is showerproof in 30 minutes, has a quick recoat time, and is low odour. Suitable for metal, wood, cast iron, and aluminium. For best results, ensure surfaces are clean, dry, and free from dirt, dust, and grease. For bare metal, remove loose rust or paint with a wire brush or sandpaper and wipe down with a damp cloth. For previously painted metal, lightly sand if the paint is in good condition, or remove flaking paint with sandpaper or a wire brush and wipe with a damp cloth. Stir the paint well before applying with a brush, roller, or sprayer. Dilute with 10% water if spraying. Allow 2-4 hours between coats, with 2 coats recommended for good coverage and 3 for rusty metal. Touch dry in 30 minutes. Clean brushes and rollers with warm soapy water. Do not empty leftover paint into drains or watercourses.
Ronseal Unisex Black Direct To Metal Paint Satin 750MlFree delivery in 1–3 days£23.54Visit shop →
Ronseal Unisex Black Direct To Metal Paint Matt 750MlFree delivery in 1–3 days£23.54Visit shop →
Ronseal Unisex Black Direct To Metal Paint Gloss LargeFree delivery in 1–3 days£61.32Visit shop →
Product Information
Full details
This guide is for anyone looking to protect and beautify metal surfaces with Ronseal Direct to Metal Paint. This paint offers a durable, primer-free solution, saving you time and effort. Note that while it's quick-drying, optimal results depend on proper surface preparation.
All features
Colour
Black
Model Part Number
39195
Brand
Ronseal
Extended Product Information
FAQs
Do I need a primer before applying Ronseal Direct to Metal Paint?
No, this paint is designed to be applied directly to metal surfaces, including rusty ones, eliminating the need for a primer.
How long does it take for the paint to dry?
The paint is showerproof in 30 minutes, with a quick recoat time, but allow sufficient time for complete drying between coats.
Can I use this paint on outdoor metal surfaces?
Yes, this paint is suitable for both indoor and outdoor use.
How many coats of paint should I apply?
For the best results, apply two coats of paint.
How do I clean my brushes and rollers after use?
Clean brushes and rollers with water immediately after use.
What is the coverage of Ronseal Direct to Metal Paint?
The paint covers up to 8m² per litre.
What colours are available?
The paint is available in various colours, including black, grey, and white.
Troubleshooting
Paint is not adhering properly.
Ensure the surface is clean, dry, and free of loose rust. Lightly sand the surface to improve adhesion if necessary.
Paint is running or dripping.
Apply thinner coats and avoid overloading the brush or roller. Ensure the surface is level.
Paint is taking too long to dry.
Ensure adequate ventilation and check the temperature and humidity levels. Allow sufficient time for each coat to dry before applying the next.
Pros and Cons
Pros
No primer needed, saving time and money.
Can be applied directly to rust.
Quick recoat time.
Provides 15 years of protection.
Water-based formula for easy cleanup and environmental friendliness.
Cons
Requires proper surface preparation for optimal results.
May require multiple coats for complete coverage depending on the surface and colour.
Colour accuracy can vary slightly depending on the application method.
Setup, Compatibility & Care
Surface Preparation:
Remove loose rust, dirt, and old paint.
Clean the surface with a suitable metal cleaner.
Ensure the surface is dry before applying paint.
Application:
Stir the paint thoroughly before use.
Apply the paint with a brush or roller.
Apply two coats for the best results, allowing the recommended recoat time between coats.
Compatibility:
Compatible with most metal surfaces.
Not recommended for use on surfaces that are constantly submerged in water.
Care:
Clean up spills immediately with water.
Wash brushes and rollers with water immediately after use.