Cuprinol Ultra Tough Wood Filler - Exterior Woodcare - White - 250g

The filler is workable for up to 10 minutes and dries hard within approximately 30 minutes under normal conditions.

Yes, it is suitable for both interior and exterior use, offering durable and weather-resistant repairs.

You have approximately 10 minutes to mix and apply the filler once the catalyst has been added.

Yes, once dry, the filler can be screwed, drilled, sanded, and filed, behaving much like natural wood.

Remove as much product as possible from the application equipment before cleaning with brush cleaner.

Prepare the surface well and test your chosen paint or woodstain on a small area first to ensure satisfaction before applying to the entire repair.

This is typically caused by adding too much catalyst paste during mixing. Adhere strictly to the recommended proportions for optimal performance and safety.

This is likely due to using too much catalyst. Ensure you follow the recommended mixing proportions precisely. Only mix an amount that can be used within 10 minutes.

Ensure the surface was properly prepared. Remove all paint, varnish, dirt, loose material, and decayed wood. The surface must be sound and dry.

A slight tackiness can occur but should not affect smoothing, painting, or staining. Ensure it has set hard (approx. 30 minutes) before attempting to sand.

This can be influenced by wood preparation and the type of stain. Always test the finish in an inconspicuous area first to ensure satisfactory results before applying to the entire repair.

Ensure the filler has fully hardened before sanding. Use appropriate grit sandpaper for smoothing.