Cuprinol Ultimate Garden Wood Preserver 1L - Golden Cedar
Cuprinol Ultimate Garden Wood Preserver is a water-based, timber treatment for all your exterior r...Cuprinol Ultimate Garden Wood Preserver is a water-based, timber treatment for all your exterior rough-sawn wood, including sheds, fences, summerhouses and cabins. Formulated to offer UV protection, the added waxes and resins provide superb weather protection and deeply penetrate the wood to resist decay and blue stain. Lightly tinted in a range of colours it's an ideal product to add colour to your garden whilst protecting the wood. This preserver offers 5 years of performance and protects against rot, decay, and blue stain. It also provides UV Protection and is available in a range of colours.
This guide is for anyone looking to protect and enhance their exterior wooden structures with Cuprinol Ultimate Garden Wood Preserver. It offers up to 5 years of protection against weather damage, rot, decay, and blue stain, while also providing UV protection. Keep in mind that the final color may vary slightly depending on the wood type and previous treatments.
All features
Model Part Number
5206069
Brand
Cuprinol
Extended Product Information
FAQs
How long does the protection last?
Cuprinol Ultimate Garden Wood Preserver offers up to 5 years of protection.
What surfaces can I use it on?
It's suitable for sheds, fences, summerhouses, gates, and arbors, and decking.
How many coats are needed?
A minimum of two coats is recommended for optimal protection.
How do I clean the tools?
Clean up any spills while still wet. Remove as much product as possible from equipment before cleaning with water.
Is it suitable for indoor use?
No, it is not suitable for indoor use.
What should I do if it rains after application?
Do not apply in temperatures or if rain is likely before the product has dried. Apply evenly, avoiding splashing of surrounding plants, brickwork, glass, PVCu etc. Any splashing should be cleaned up immediately (whilst still wet) with water and household detergent. Excessive spillage on plants should be rinsed off immediately before drying.
Can I apply it to wood that's already painted or stained?
Wood that has been woodstained, painted, or varnished should be stripped back to bare wood and treated as bare wood.
Troubleshooting
Color is not as expected
Test on a small, representative area first, as the final color can be affected by the wood type and previous treatments.
Product is repelling
Ensure recoating is done within 2-3 days. If longer, test a small area before full application.
Slow drying time
Ensure proper ventilation and check weather conditions, as humidity and temperature can affect drying time.
Pros and Cons
Pros
Long-lasting protection for up to 5 years.
Provides both weather and UV protection.
Protects against rot, decay, and blue stain.
Water-based formula for easy application and cleanup.
Enhances the appearance of wood with a range of colors.
Cons
Color can vary depending on wood type and previous treatments.
Not suitable for timber in ground contact situations.
Requires multiple coats for optimal protection.
Recoating within 2-3 days is recommended.
Setup, Compatibility & Care
Surface Preparation: Ensure surfaces are dry and free from dirt, algae, and previous treatments. Remove any existing algae or moss with a fungicidal wash.
Application: Apply a minimum of two even coats with a brush, allowing the previous coat to soak in before applying the next.
Drying Time: Allow 2-6 hours of drying time between coats under normal weather conditions. Maximum drying time is 6 hours.
Tool Cleaning: Clean up spills immediately with water and household detergent. Clean equipment with water after use.
Storage: Store in moderate temperatures and protect from frost. Do not store or use in extreme temperatures.
Compatibility:
Suitable for use on most types of exterior rough-sawn wood.
Not suitable for timber in ground contact situations.
Care:
Recoat within 2-3 days of the previous coat.
If longer than 3 days, test a small area to ensure the product is not repelled.