Cuprinol Furniture Wood Stain - Antique Pine - 750ml
This garden furniture stain from the Cuprinol Softwood & hardwood range can be applied using a bru...This garden furniture stain from the Cuprinol Softwood & hardwood range can be applied using a brush to colour and provide protection. It takes 2-6 hours to dry and will cover up to 20 m² per litre on average. The stain creates a lasting water-repellent barrier and weather protection, suitable for all woods, including hardwood and softwood. It adds a rich colour to softwood and a light tint to hardwood. Coverage: Approx. 15m² per 750ml.
This guide helps you get the most out of Cuprinol Garden Furniture Stain, ideal for protecting and coloring your garden furniture. It provides a water-repellent barrier that enhances wood grain and resists cracking. Note that the final color depends on the wood type and the number of coats applied.
All features
Colour
Brown
Model Part Number
5158526
Brand
Cuprinol
Extended Product Information
FAQs
How much area does one 750ml can cover?
Approximately 15 m².
How long does it take for the stain to dry?
It dries in 2-6 hours between coats.
Can I use this stain indoors?
No, this product is specifically designed for outdoor use.
How many coats of stain should I apply?
Apply 2-3 coats for optimal protection and color.
What should I do if it rains before the stain is dry?
Avoid applying if rain is likely before the product has dried. If rain occurs before drying, reapply after the surface has thoroughly dried.
How do I clean my application tools?
Clean tools with water immediately after use.
Is the product water-based?
Yes, it is a water-based formula.
Where should I store the product?
Store in a cool, dry place, away from extreme temperatures.
Troubleshooting
Stain is not covering evenly.
Ensure the surface is properly prepared, clean, and sanded. Apply the stain evenly, following the wood grain. Stir the stain well before application.
Stain is taking too long to dry.
Check weather conditions; avoid applying in damp conditions or temperatures below 5 degrees C. Ensure thin, even coats are applied.
Color is not as expected.
The final color depends on wood type and number of coats applied. Always test on a small, inconspicuous area first.
Pros and Cons
Pros
Adds a rich color to softwood and a light tint to hardwood.
Creates a long-lasting water-repellent barrier.
Easy application with a brush.
Quick drying time allows for multiple coats in a day.
Water-based, low VOC formula.
Cons
Final color dependent on wood type and number of coats.
Requires 2-3 coats for optimal protection.
Not suitable for indoor use.
Application is not recommended in damp conditions or temperatures below 5 degrees C.
Setup, Compatibility & Care
Surface Preparation:
Remove dirt, algae, and any old coatings.
Sand the surface to ensure a smooth finish.
For bare oily timbers like teak, wipe with white spirit and allow to dry.
Application:
Stir the stain thoroughly before use.
Apply 2-3 coats evenly along the grain.
Allow 2-6 hours drying time between coats under normal weather conditions.
Compatibility:
Suitable for use on bare or previously stained garden furniture.
Not suitable for indoor use.
Care:
Clean tools with water after use.
Store in a cool, dry place, away from extreme temperatures.