Cuprinol 5 Year Ducksback Exterior Wood Paint - Harvest Brown - 5L

No, this product is specifically formulated for rough-sawn timber like sheds, fences, and pergolas. It is not recommended for smooth wood surfaces as it may not adhere or perform as intended.

For optimal protection and colour depth, 2-3 coats are recommended. Ensure to allow 2-4 hours drying time between coats.

Cuprinol Ducksback provides up to 5 years of weatherproof protection for your rough-sawn timber when applied correctly.

Yes, Cuprinol Ducksback is low odour and safe for use around plants and pets once it has dried.

A 5L tin will cover up to 24m² with a single coat. For the recommended 2-3 coats, you can expect total coverage of up to 25m² depending on wood porosity.

The product is showerproof in 1 hour and recoatable in 2-4 hours. It is important to apply subsequent coats within 2-3 days of the previous one for best results.

Clean your brushes and other application tools immediately after use with warm, soapy water.

Ensure the product is thoroughly stirred before and during use. Apply evenly along the grain of the wood. Make sure the surface is clean and dry before application. Apply the recommended 2-3 coats for a consistent finish.

Check ambient temperature and humidity. Drying times can be extended in cold, damp, or highly humid conditions. Ensure proper ventilation if applying in a partially enclosed area. Avoid applying too thickly.

Ensure you are applying to rough-sawn timber, as smooth surfaces will not absorb the product effectively, leading to runs. Do not overload the brush. Apply thinner, even coats. For drips, immediately brush them out or wipe clean while wet.