Sadolin Extra Durable Woodstain - African Walnut - 1 Litre

This specific woodstain is not recommended for decking or areas subject to heavy wear. For garden furniture that experiences significant exposure or abrasion, consider a product specifically designed for such use.

Drying times can vary based on temperature and humidity. Typically, recoating is possible after 16-24 hours. Always refer to the specific instructions on the product packaging for precise drying times.

Application by brush is recommended for best control and finish. Apply in the direction of the wood grain, ensuring even coverage with thin coats.

No, this woodstain is designed for bare or previously stained wood. Previously varnished or painted surfaces must be completely stripped back to bare wood before application.

For optimal protection and colour depth, 2-3 coats are generally recommended. Ensure adequate drying time between each coat.

African Walnut is a rich, warm brown shade. The final appearance will depend on the underlying wood and the number of coats applied.

Coverage varies depending on the type and condition of the wood. Refer to the product packaging for estimated coverage per litre, typically around 10-12 square metres per litre for one coat.

Ensure the surface was properly prepared, clean, and dry. Sand smooth surfaces and remove all dust before application. Check if a base coat was used on new hardwood as recommended.

Stir the product thoroughly before and during application. Apply thin, even coats, ensuring complete coverage. Avoid over-application in one area.

This can occur in humid conditions or if applied too thickly. Ensure adequate ventilation during drying and apply thinner coats. Allow for longer drying times if necessary.

The final colour can vary depending on the wood type and the number of coats applied. Test on an inconspicuous area first if unsure. The colour will deepen with subsequent coats.