Sadolin Wet Wood Decking Stain is an innovative formula that can be applied to wet wood, eliminati...Sadolin Wet Wood Decking Stain is an innovative formula that can be applied to wet wood, eliminating the need to wait for dry weather. It offers advanced UV technology for a more durable finish with optimum adhesion compared to other decking oils. The UV rays activate the formula as it dries, creating a hard-wearing surface. This stain also includes algae and mould inhibitors to protect against growth. It is easy to apply and provides a long-lasting finish for both DIY and professional decorators. For best results, apply 2-3 liberal coats with a good quality synthetic fibre bristle brush, ensuring surfaces are completely saturated by applying several 'wet on wet' coats. Technical Details: Suitable for Woodcare / Exterior. Substrates: Decking. Application: Brush. Finish: Matt / Translucent. Recoatable time: 4-6 Hours. Spreading rate: Up to 10m2/litre. Touch dry: 2-4 Hours.
This guide is for anyone using Sadolin Wet Wood Decking Stain, a product designed for easy application on wet wood surfaces. The key benefit is its ability to be applied in less-than-ideal weather conditions, saving you time. Keep in mind that while it offers a durable finish, proper surface preparation is still essential for optimal results. This stain features advanced UV technology and algae/mould inhibitors, providing long-lasting protection and a beautiful finish.
All features
Colour
Grey
Model Part Number
456934
Brand
Sadolin
Extended Product Information
FAQs
Can I apply this stain on any type of wood?
Yes, Sadolin Wet Wood Decking Stain is suitable for most types of decking wood.
How many coats should I apply?
For best results, apply 2-3 liberal coats.
How long does it take for the stain to dry?
It is touch dry in 2-4 hours and recoatable within 4-6 hours.
Do I need to sand the wood before applying the stain?
Sanding is not always necessary if the wood is new or in good condition, but it can improve adhesion.
What kind of brush should I use?
Use a good quality synthetic fibre bristle brush.
How much area can I cover with one litre of stain?
The spreading rate is up to 10m2/litre.
Is this stain resistant to UV rays?
Yes, it contains advanced UV technology for enhanced durability and protection.
Does this stain protect against mould and algae?
Yes, it includes algae and mould inhibitors.
Troubleshooting
Stain not adhering properly.
Ensure the surface is properly prepared, removing any loose or flaking material. Apply the stain in several 'wet on wet' coats.
Uneven finish.
Apply the stain evenly, following the grain of the wood. Avoid applying too much stain in one area, and ensure adequate coverage.
Algae or mould growth.
Ensure proper surface cleaning and maintenance. Check for any areas of standing water. If the problem persists, reapply the stain.
Pros and Cons
Pros
Can be applied to wet wood, saving time.
Offers a durable, long-lasting finish.
Includes UV protection to prevent fading and damage.
Contains inhibitors to prevent algae and mould growth.
Easy to apply with a brush.
Cons
Requires multiple coats for best results.
Surface preparation is still important for optimal adhesion.
Recoat time of 4-6 hours may require planning.
Spreading rate of up to 10m2/litre may require multiple purchases.
Setup, Compatibility & Care
Surface Preparation: Ensure the decking surface is clean and free from loose debris, dirt, and old coatings. While the stain can be applied to wet wood, the surface should be prepared for best results.
Application: Use a good quality synthetic fibre bristle brush. Apply 2-3 liberal coats, ensuring the surface is completely saturated. Apply several 'wet on wet' coats for optimum results.
Drying Time: The product is touch dry in 2-4 hours, and recoatable within 4-6 hours. Ensure adequate ventilation during application and drying.
Compatibility: This stain is specifically designed for exterior wood, particularly decking. It is compatible with wood.
Care: Regularly clean the decking with a mild detergent and water to remove dirt and maintain its appearance. Avoid using harsh chemicals or abrasive cleaners.