Johnstone's Trade Woodworks Satin Woodstain - Brown

This woodstain is suitable for smooth timber joinery like doors, windows, fascia boards, cladding, and garden furniture. It can be used on both hardwood and softwood, for both interior and exterior use.

Ensure the surface is sound, clean, dry, and free from dust, grease, polish, or any other surface contaminant. Remove any resins and natural oils using White Spirit. Sound, existing varnish should be rubbed down with fine waterproof abrasive paper, rinsed thoroughly, and allowed to dry. Previously untreated softwood should be treated with a suitable clear preserver.

For optimal protection and a richer color, apply multiple coats. Allow each coat to dry completely before applying the next.

Yes, you can apply this woodstain to previously treated wood. However, you need to ensure the existing surface is properly prepared by removing any loose or flaking stain and sanding the surface lightly.

Clean tools with White Spirit immediately after use.

The woodstain is available in a variety of ready-mixed colors, including clear, light oak, antique pine, redwood, walnut, mahogany, medium oak, jacobean oak, teak, ebony, pine, and rosewood.

Yes, the woodstain is designed for easy application, making it suitable for both professional and DIY use.

This woodstain provides a microporous satin finish that highlights the natural grain of the wood.

Ensure the woodstain is mixed thoroughly before application. Apply an even coat, following the wood grain, and avoid excessive build-up.

Check the surrounding temperature and humidity, as these factors can affect drying time. Ensure that the surface is clean and free from contaminants. Make sure adequate ventilation is available.

Test the woodstain on a small, inconspicuous area to check the color before applying to the entire surface. The type of wood and number of coats can affect the final color.