Ft Paints Water-Based Polyurethane Paint - 400Ml Spray Can - Reseda Green
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K PU Topcoat in Reseda Green is designed for professionals and serious DIYers seeking a durable, high-performance coating for vehicles, machinery, and metal structures. Its key benefit is superior protection against mechanical stress, chemicals, UV, and weather. A potential caveat is the 2K system requiring careful mixing and application for optimal results.
All features
| Colour | Green |
|---|---|
| Model Part Number | FT-WPU2425-400AER-M-SC |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the correct mixing ratio for the 2K system?
Refer to the product's technical data sheet or label for the precise mixing ratio between the base and the hardener. Accurate mixing is critical for proper curing and performance.
Can I spray this product with a brush or roller?
While designed for spraying, application with a high-quality brush or roller may be possible for small areas. However, achieving a uniform finish comparable to spraying can be challenging. Always test on an inconspicuous area first.
How long is the pot life after mixing?
The pot life (working time) of a 2K coating is limited after mixing. Consult the product documentation for the specific pot life of this formulation, and only mix what can be applied within that timeframe.
What is the shelf life of the product?
Unmixed components typically have a shelf life. Store in original, tightly sealed containers in a cool, dry place. Refer to the product packaging or manufacturer's website for specific shelf life information.
Is this product suitable for food contact surfaces?
This product is not intended for direct food contact. It is designed for industrial and automotive applications requiring mechanical and chemical resistance.
How do I clean up my equipment after use?
Clean spray equipment immediately after use with appropriate solvents recommended by the manufacturer for waterborne polyurethane coatings. Prompt cleaning prevents the coating from curing in the equipment.
What is the difference between this aerosol and a kit version?
The aerosol version (FT-WPU2425-400AER-M-SC) is a convenient, pre-mixed, ready-to-use format for smaller jobs. Kit versions (e.g., FT-WPU2425-P1.82L-H0.46L-T0.47L-S-MF) require mixing of base and hardener and are typically for larger projects.
Troubleshooting
Uneven finish or runs
Ensure proper spray technique, maintain consistent distance from the surface, and adjust spray pressure and flow rate. Reduce application rate if the surface is becoming overloaded.
Coating does not adhere properly
Verify the surface was thoroughly cleaned and prepared. Ensure compatibility with primers used and that all surface contaminants were removed prior to application.
Product dries too quickly or too slowly
Check for incorrect mixing ratios or ambient temperature/humidity that deviates significantly from recommended application conditions. Ensure the correct hardener is used if applicable.
Bubbling or pinholing
Ensure proper ventilation during application to allow solvents to escape. Avoid applying in excessively humid conditions or over contaminants.
Pros and Cons
Pros
- Exceptional resistance to mechanical stress and chemicals.
- Durable UV and weather protection for extended outdoor performance.
- Fast drying times improve workflow efficiency.
- Semi-gloss finish offers a professional aesthetic.
- Suitable for demanding industrial and commercial environments.
Cons
- 2K system requires precise mixing of components.
- Application may require specialized spraying equipment and ventilation.
- Extended curing time of 7-8 days may impact project timelines.
- Color is specific (Reseda Green), limiting direct use for other color needs.
- Potential for overspray due to extended open time if not managed carefully.
Setup, Compatibility & Care
Setup: This is a 2K (two-component) product. Ensure proper mixing ratios are followed as per the manufacturer's instructions for the base and hardener components. Wear appropriate personal protective equipment (PPE), including gloves, eye protection, and respiratory protection, in a well-ventilated area.
Compatibility: Designed for optimal adhesion with WEP Primers. It can be applied to properly prepared metal surfaces. Ensure surfaces are clean, dry, and free from contaminants.
Care: For the first 7 days after application, avoid heavy abrasion, cleaning with harsh solvents, or exposing the surface to extreme temperatures. After full cure, clean using mild detergents and water. Avoid abrasive pads or strong chemical cleaners that could damage the finish.