Osmo Country Colour - Nordic Red - 5ml

Drying time is typically 24 hours between coats, but this can vary based on temperature, humidity, and ventilation. Ensure good airflow for best results.

While it is designed for exterior use, it can be used indoors if good ventilation is maintained. However, Osmo offers specific interior wood finishes that may be more suitable for indoor applications.

Reapplication frequency depends on the wood's exposure to the elements. Generally, a maintenance coat may be needed every 1-3 years. Look for signs of wear, such as water no longer beading on the surface.

Coverage varies depending on the wood type and absorbency, but typically one liter covers approximately 12-16 square meters with one coat.

Yes, Osmo Country Colour shades can be mixed together to create custom colors. Always test mixed colors on a scrap piece of wood first.

Unopened, the product has a shelf life of at least 5 years. Once opened, it should be used within one year, ensuring the lid is tightly sealed.

The product is based on natural ingredients and has low VOCs. However, it is recommended to keep pets and children away from treated surfaces until they are fully dry and cured.

Ensure the product was stirred thoroughly before application. Apply thinly and evenly, and remove any excess oil that does not penetrate. Check for inconsistent surface preparation.

This indicates too much oil was applied or excess was not removed properly. Allow more drying time in a well-ventilated area. If still tacky after several days, lightly sand the surface and apply a very thin coat of oil.

Ensure the wood surface is porous and clean. Very dense hardwoods or previously sealed surfaces may resist penetration. Light sanding can help improve absorption.

Confirm adequate coats were applied and the surface was properly prepared. Harsh weather conditions may require more frequent reapplication. Ensure only Osmo-compatible products were used previously.