Osmo Country Colour - Light Ochre - 125Ml - 2203

For most applications, one generous coat or two thin coats are recommended. Ensure adequate drying time between coats if applying multiple.

While primarily designed for exterior use, it can be used on interior wood that requires a durable, natural finish. However, specific interior finishes might be better suited for indoor environments.

The duration of protection varies based on weather exposure and wood type, but typically lasts at least one year. Regular maintenance coats will extend the protection and appearance.

Generally, no sanding is required between coats. If a very smooth finish is desired, a light sanding can be done after the first coat has fully dried, but ensure all dust is removed before applying the next coat.

Osmo products are generally safe and often used in applications like children's furniture. However, always check the specific product's safety data sheet for suitability with direct food contact or sensitive applications.

Coverage is approximately 16 m² per liter with one coat on planed wood. This can vary significantly depending on the wood's porosity and surface preparation.

Ensure the product is thoroughly mixed before and during application. Apply thinly and evenly, wiping off any excess product within 10-20 minutes of application.

Check ambient temperature and humidity. Ensure adequate ventilation. Avoid applying too thickly. Excessive moisture in the wood can also affect drying times.

The wood may require a second thin coat. Ensure all excess product was wiped off during the initial application. Test on an inconspicuous area first.