Osmo Country Colour - Ivory - 2.5L

A 2.5L can of Osmo Country Colour Wood Oil typically covers approximately 30-50 square meters with a single coat, depending on the wood's absorbency and the application method.

While designed for exterior use, Osmo Country Colour Wood Oil can be used indoors on surfaces that require durability and a natural finish. However, Osmo also offers specific interior wood finishes that may be more suitable for certain applications.

Generally, sanding between coats is not necessary unless the surface has become rough due to raised grain from the first coat. A light de-nibbing with fine-grit sandpaper can be done if needed.

Reapplication frequency varies based on exposure to weather and foot traffic. Typically, a maintenance coat is recommended every 2-4 years, or when the water-repellent properties visibly diminish.

Osmo Country Colour Wood Oil is based on natural ingredients and is safe once dry. However, for items like children's toys that may be frequently mouthed, it's always best to consult the specific product data sheet for detailed safety information or consider products specifically certified for toy safety.

Osmo Country Colour is a range of opaque, colored wood oils designed for exterior protection and aesthetic enhancement. Other Osmo oils might be clear, transparent, or semi-transparent, offering different levels of color saturation and protection suited for various wood types and applications.

Yes, Osmo Country Colour shades can be mixed together to create custom colors. Always mix a larger batch than needed to ensure color consistency if multiple applications are required.

Ensure the wood surface is uniformly porous and dry. Apply in thin, even coats, working the oil into the grain. Avoid over-application and ensure there are no 'pools' of oil. If blotchiness occurs on a porous wood, a test area is advised.

Check ambient temperature and humidity; drying can be slow in cold or damp conditions. Ensure ventilation is adequate. Do not apply excessively thick coats. Verify that the product has not expired or been contaminated.

This usually indicates too much oil was applied or it was not worked in sufficiently. Wipe off any excess oil that has not penetrated after about 15-20 minutes of application. If already dry and sticky, it may require a light sanding and reapplication of a thin coat.

Wood naturally darkens when oiled. The final color depends on the wood type and the number of coats applied. Consider performing a test on an inconspicuous area first, or apply a thinner first coat.