Crown Walls & Ceilings Palm Springs Matt Emulsion Paint 2.5L - Green

A 2.5L tin typically covers approximately 25 square meters per coat, though actual coverage can vary depending on the porosity and texture of the surface, as well as the application method used.

> Info needed: Specific drying time. Generally, it is touch dry in 2-4 hours and can be recoated after 4 hours. Always check the specific drying instructions on the product label for precise timings.

No, this product is specifically formulated for interior walls and ceilings. For wood or metal surfaces, you should use paints designed for those materials to ensure proper adhesion and durability.

As a standard matt emulsion, it is generally wipeable with a soft, damp cloth for minor marks. However, it is not designed to be highly scrubbable like durable matt or silk finishes, as aggressive cleaning can damage the matt surface.

For new, bare, or highly absorbent surfaces (like new plaster), applying a mist coat (paint diluted with 10-20% water) is recommended as a primer. On previously painted, sound surfaces, a separate primer is usually not necessary if the surface is clean and prepared.

For optimal results, use a good quality synthetic paint brush for cutting in edges and corners, and a medium-pile roller for applying paint to larger wall and ceiling areas. These tools will help achieve a smooth and even finish.

Do not pour leftover paint or cleaning water down drains. Allow small amounts of paint to dry out in the tin and dispose of it as household waste. For larger quantities, contact your local authority for information on proper disposal or recycling facilities for paint.

Ensure the surface is properly prepared, clean, and dry. Apply paint evenly, maintaining a wet edge, and avoid overworking the paint. Use a good quality roller and apply consistent pressure. Ensure adequate drying time between coats.

Stir the paint thoroughly before and during use to ensure pigments are well-mixed. Ensure the surface is not overly absorbent; if it is, apply a mist coat first. Apply at least two full coats, allowing proper drying time between each. For very dark existing colors, more coats may be needed.

This is often caused by poor surface preparation. Ensure surfaces are completely clean, dry, and free from grease, dust, or loose paint. Previously glossy surfaces may need light sanding to provide a key for the new paint. Avoid painting over damp surfaces.