Dulux Weathershield Masonry Paint - Fresh Slate - 5L

This paint is formulated to provide up to 15 years of all-weather protection, maintaining its colour and finish.

It has a smooth matt finish, providing a contemporary and elegant look to exterior walls.

No, this paint is specifically formulated for exterior masonry surfaces and is not recommended for interior use due to its specialized weather protection properties.

It is suitable for exterior masonry surfaces such as brickwork, render, concrete, pebbledash, and roughcast.

Stay Clean technology helps prevent dirt from adhering to the paint surface and inhibits mould growth within the paint film, contributing to a longer-lasting clean appearance and reduced maintenance.

For best results, especially on highly porous, chalky, or previously unpainted surfaces, priming with a suitable masonry primer is recommended to ensure even absorption and optimal paint adhesion. Always check the product tin for specific preparation guidance.

Typically, two coats are recommended for optimal coverage, durability, and to achieve the full protective benefits of the paint. However, always refer to the specific instructions on the paint tin.

Thorough surface preparation is crucial. Ensure the surface was clean, dry, sound, and free from loose paint or dirt before application. For highly porous or chalky surfaces, using a suitable primer is often necessary to promote adhesion.

Ensure the paint was thoroughly stirred before and during use. Apply evenly with appropriate tools (quality masonry brush or roller) in consistent strokes. Avoid overspreading the paint. Ensure the recommended number of coats (typically two) were applied, allowing adequate drying time between coats.

While the paint inhibits mould growth *within* the paint film, persistent underlying dampness or severe, continuous moisture issues on the wall's surface can still encourage external mould growth. Investigate and address any structural sources of moisture or dampness affecting the wall.

Ensure you applied the recommended number of coats (usually two). If the previous surface colour was very dark or uneven, an additional coat or a suitable primer may be required. Stir paint well to ensure pigment is evenly dispersed.