Dulux Weathershield Masonry Paint - Magnolia - 10L

This paint is suitable for exterior masonry surfaces such as brick, concrete, pebble-dash, and render.

For a rich depth of colour and optimal protection, two coats are recommended.

You can recoat after 4 hours, allowing for quick project completion.

Yes, it is a water-based paint with minimal VOCs, making it a safer choice for your home and the environment.

The product description mentions application with a brush or roller. For spray application, always consult the manufacturer's technical data sheet for specific thinning and equipment recommendations. Info needed: confirm spray gun compatibility

A 10L can will cover approximately 15 m² per coat on average, depending on surface porosity and texture.

Yes, Dulux Weathershield Masonry Paint is designed to be resistant to mould, water, and ultraviolet light.

Ensure the surface was clean and properly prepared. Apply an even second coat, making sure to spread the paint uniformly. Consider a primer if the surface is highly porous.

Check ambient temperature and humidity; paint dries slower in cold or damp conditions. Ensure thin, even coats are applied. Adequate ventilation can also aid drying.

This paint requires two coats for rich colour and full protection. If coverage is still poor after two coats, ensure the paint was stirred thoroughly and applied evenly, or consider surface porosity.

This often indicates poor surface preparation. Ensure all loose or old paint was removed, and the surface was clean, dry, and sound before application. Remove affected paint, re-prepare the surface, and reapply.