Ft Paints Water-Based Polyurethane Paint Kit - Ral 5015-Sky Blue
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
The FabioT. RT 2K PU Topcoat is a premium waterborne polyurethane coating designed for surfaces subjected to significant mechanical and chemical stress, such as vehicles, machinery, and metal structures. Its semi-gloss finish offers robust protection against UV rays and weather, excellent resistance to solvents and scratches, and reliable performance in demanding environments. While it provides a durable decorative appearance and fast drying times, users should be aware that it requires proper preparation and application for optimal results, particularly concerning its 2K (two-component) nature.
All features
| Colour | Blue |
|---|---|
| Model Part Number | FT-WPU2425-P0.73L-H0.18L-T0.19L-M-IE |
| Brand | FabioT. |
Extended Product Information
FAQs
What is the mixing ratio for the 1.10 L kit?
The standard ratio for the 1.10 L kit (0.73 L Paint, 0.18 L Hardener, 0.19 L Thinner) is typically 4:1 by volume (Paint:Hardener). Refer to the product label for the precise ratio and any specific induction times.
How long does it take to become dust-dry?
The coating typically becomes dust-dry within 1 to 1.5 hours under normal conditions.
What is the full curing time?
The coating requires approximately 7 to 8 days to achieve a full cure.
Can this product be applied with a brush?
While primarily designed for spraying, it may be possible to apply with a high-quality brush or roller for certain applications. Adjust viscosity with the appropriate thinner and test on a small area first, as results may vary and a perfect finish might be challenging.
What kind of primer should I use?
This topcoat is compatible with FabioT. WEP Primers. Using the recommended primer will ensure maximum adhesion and durability.
Can I use this on wood or plastic surfaces?
This product is engineered for metal structures, vehicles, and machinery. It is not recommended for wood or plastic surfaces without appropriate specialized primers and testing, as adhesion and performance may be compromised.
How should I clean the equipment after use?
Clean spray equipment immediately after use with water and a suitable cleaner, as per the equipment manufacturer's recommendations for waterborne coatings.
Troubleshooting
Product not drying properly
Ensure the correct mixing ratio of paint and hardener was used. Verify that the ambient temperature and humidity are within the recommended application range. Check that the substrate was clean and dry before application.
Poor adhesion to the surface
Confirm that the surface was adequately prepared (cleaned, degreased, and possibly abraded) and that the recommended primer was used. Ensure the product was applied within its pot life.
Uneven finish or 'orange peel'
Adjust spray gun settings (pressure, fan pattern, nozzle size) and application technique. Ensure proper thinning for the application method. Maintain a consistent distance from the surface during spraying.
Pinholes or blistering
Ensure the surface is free of contaminants like silicone or moisture. Check for proper ventilation during application and drying. Avoid applying too thickly in a single coat.
Pros and Cons
Pros
- Excellent resistance to UV, weather, solvents, and scratches.
- Durable semi-gloss finish suitable for demanding applications.
- Fast drying times contribute to efficient project completion.
- High heat resistance up to 180°C for short durations.
- Extended open time aids in application on large surfaces.
Cons
- Requires mixing two components (paint and hardener) accurately.
- Proper surface preparation is critical for optimal adhesion and performance.
- Long full cure time of 7-8 days means the surface is vulnerable before complete hardening.
- May require specialized application techniques for best results.
- Waterborne formulation means careful temperature and humidity control during application might be necessary.
Setup, Compatibility & Care
Setup: This is a two-component (2K) system. The paint and hardener must be mixed in the correct ratio as specified by the manufacturer, typically indicated on the product packaging. Use a mechanical stirrer or ensure thorough hand mixing to achieve a homogenous blend. The included thinner may be used to adjust viscosity for application, depending on the chosen method (e.g., spraying, brushing). Allow the mixed product to 'pot' for the recommended induction time before application.
Compatibility: The RT 2K PU Topcoat is designed to be applied over FabioT. WEP Primers for optimal adhesion and performance. Ensure surfaces are clean, dry, and free from contaminants like oil, grease, or dust. It is formulated for use on vehicles, machinery, and metal structures.
Care: After the coating has fully cured (7-8 days), routine cleaning can be performed using mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. For maintenance, recoating can be done following the manufacturer's guidelines, usually after a light abrasion of the existing surface if necessary.