Siramico Coatings One Coat Anti-Slip Floor Paint - 5 Litres - Grey

This paint is suitable for concrete, stone, brick, and wood floors.

Yes, it is an eco-friendly, non-toxic, water-based formula with no VOCs and no odor, making it safe for indoor applications.

The paint dries in 1-4 hours at 20°C. Drying times can vary based on temperature and humidity.

Clean brushes, rollers, and spills with water while the paint is still wet.

While the paint is designed for direct application, proper surface preparation is key. For extremely porous or stained surfaces, a compatible primer may improve adhesion and coverage.

Typically, two thin, even coats are recommended for best results. Allow sufficient drying time between coats.

The product description focuses on indoor use and durability for foot traffic. For exterior applications, consult the manufacturer for suitability or specific product recommendations.

Ensure the surface was thoroughly cleaned and prepared before application. Dust, grease, or moisture can prevent proper adhesion. Re-prepare the surface and reapply.

Apply paint in thin, even coats using a high-quality roller or brush. Avoid overworking the paint. Ensure consistent application technique.

Lower temperatures, higher humidity, or thicker coats can extend drying times. Ensure the application environment is within the recommended temperature range (typically above 10°C) and humidity levels are moderate.

This can be due to insufficient stirring or inconsistent application. Ensure the paint is thoroughly mixed and applied evenly. Consider a second thin coat if necessary.