Setup, Compatibility & Care
Surface Preparation is Key: Before application, ensure all surfaces are sound, clean, dry, and free from dust, grease, and any loose material. Remove any existing mould growth with a suitable cleaner. For optimal adhesion, use appropriate primers on surfaces like bare plaster, previously painted surfaces, or porous materials. For metal surfaces, ensure they are clean and free from rust, using a metal primer if necessary.
Compatibility: The coating adheres to a wide range of substrates including metal, brick, tiles, wood, and plastics. Once fully cured, it can be over-coated with standard water-based emulsion paints if a different colour finish is desired.
Application: Apply using a brush or roller. Two coats are generally recommended for best results. Allow adequate drying time between coats as per manufacturer instructions.
Care: Maintain good ventilation in the treated areas. Clean surfaces gently with a damp cloth. Avoid abrasive cleaners, which could damage the finish. Regular cleaning and good hygiene practices will help maintain the paint's effectiveness against mould.