Siramico Coatings Liquid Rubber Roof Coating - Grey - 5 Litres

Siramico Coatings Liquid Rubber is a premium, multi-surface, one-coat instant waterproofing soluti...

Best current price£59.99from B&Q

Colour

All Offers

2 offers from £59.99 - £69.99

View price history by clicking the chart icon.

B&QB&Q - Liquid Rubber Roof CoatingInstant Leak Seal One Coat WaterproofingGrey5 Litres
Free delivery in 1–3 days
£59.99
Visit shop
The RangeSiramico Coatings Liquid Rubber Roof Coating | 5 Litres - Grey
Free delivery in 1–3 days
£69.99
Visit shop

Product Information

Full details

This guide is for homeowners and DIY enthusiasts looking for a reliable, single-application solution for roof waterproofing. The key benefit is its instant, one-coat application that forms a durable, seamless, and elastic waterproof membrane. A potential caveat is its coverage rate of 1 square meter per litre, requiring careful calculation for larger areas. Siramico Coatings Liquid Rubber is a premium, multi-surface, one-coat instant waterproofing solution designed for flat roofs and other roofing surfaces. It provides a tough, seamless seal against leaks and water damage, offering dependable, long-term protection with minimal effort.

All features

ColourGrey
Model Part Number1256548
BrandSiramico Coatings

Extended Product Information

FAQs

Do I need a primer before applying Siramico Coatings Liquid Rubber?

No, Siramico Coatings Liquid Rubber is designed as a one-coat application and does not require a primer.

What surfaces can I apply this product to?

It adheres to a wide variety of surfaces including asphalt, brick, concrete, GRP, metal, felt, and OSB.

How much area does one litre cover?

One litre of Siramico Coatings Liquid Rubber covers approximately 1 square meter.

Can I apply this in cold weather?

It is best applied when temperatures are above 5°C (41°F) to ensure proper adhesion and curing. Avoid application during frost or heavy rain.

How long does the waterproofing last?

The Siramico Coatings Liquid Rubber provides dependable waterproofing protection for up to 10 years.

Can I walk on the surface after applying?

While the coating is quick-drying, it's best to avoid foot traffic until it has fully cured, which may take longer than just touch-dry, depending on conditions. For areas with frequent foot traffic, consider a protective top layer.

What tools should I use for application?

You can use a standard brush or a roller for application. Ensure the tools are suitable for coatings.

Troubleshooting

Product not adhering well

Ensure the surface was completely dry and free from dust, oil, or grease before application. Reapply after thorough surface cleaning and drying.

Uneven finish or streaks

Apply a more consistent, even layer with a brush or roller. Ensure the product is stirred adequately before use. Avoid applying too thinly in certain areas.

Coating remains tacky after application

This can occur in very humid or cold conditions. Ensure application is within the recommended temperature range (above 5°C/41°F) and allow extra drying time in good ventilation. Avoid walking on the surface until fully cured.

Visible bubbles or pinholes

Ensure the surface is properly prepared and free from trapped air or moisture. Apply a second thin coat if necessary to bridge small imperfections after the first coat has dried sufficiently.

Pros and Cons

Pros

  • Single-coat application saves time and labor.
  • Adheres to a wide variety of common roofing materials.
  • Forms a flexible and durable waterproof barrier.
  • Provides up to 10 years of protection.
  • Easy to apply with standard tools like a brush or roller.
  • Suitable for both flat and sloped roofs.

Cons

  • Coverage rate of 1 sq meter per litre requires precise calculation.
  • Performance may vary on extremely uneven or dirty surfaces.
  • Requires a dry surface for optimal adhesion.
  • May not be suitable for heavy foot traffic areas without additional protection.
  • Distinctive grey color may not suit all aesthetic preferences.

Setup, Compatibility & Care Instructions

Preparation: Ensure the surface is clean, dry, and free from debris, dust, and loose material before application. For optimal adhesion, remove any existing flaking paint or coatings.

Compatibility: Siramico Coatings Liquid Rubber is compatible with a wide range of common roofing materials including asphalt, brick, concrete, GRP, metal, felt, and OSB. It does not require a primer.

Application: Apply a single, even coat using a brush or roller. The product is ready to use directly from the can. Ensure full coverage as per the stated rate of 1 square meter per litre. Work in temperatures above 5°C (41°F) and ensure good ventilation.

Drying: The coating is quick-drying, typically touch-dry within a few hours, but full curing may take longer depending on environmental conditions.

Care: Once cured, the coating requires minimal maintenance. Periodically inspect the roof for any new damage. Clean the surface gently with water if necessary; avoid abrasive cleaning methods that could damage the coating.

Similar items

Price History

DatePrice
Visit shop