Setup, Compatibility & Care
Preparation: Ensure the wood surface is clean, dry, and free from dirt, grease, and existing finishes. For best results, lightly sand rough or old surfaces and remove all dust.
Application: Apply using a brush or spray in dry conditions, preferably between 10°C and 25°C. Apply thin, even coats, allowing adequate drying time between applications. Two coats are generally recommended for optimal protection.
Compatibility: Suitable for all types of bare or previously finished outdoor wood. It is recommended to test on an inconspicuous area first if unsure.
Care: Clean tools and spills immediately with water. Maintain the finish by cleaning the surface periodically with mild soap and water. Reapply as needed, typically every 1-3 years depending on exposure.