Johnstone's Wall & Ceiling Paint - Beige

It is suitable for interior walls and ceilings, including plaster, drywall, and previously painted surfaces.

For best results, apply two coats, allowing the first coat to dry completely before applying the second.

Allow the paint to fully cure, then clean with a damp cloth and mild detergent. Avoid abrasive cleaners.

Yes, prime bare surfaces with a suitable primer for optimal adhesion and finish.

While suitable for most interiors, consider a paint specifically designed for high-moisture areas like bathrooms and kitchens for better durability and mold resistance.

Coverage can vary, but typically, a 10L container will cover approximately 80 square meters, depending on the surface and application method.

Touch dry in 2-4 hours. Recoat after 4 hours.

Yes, it is washable once fully cured, making it easier to maintain.

Ensure the paint is thoroughly mixed. Apply a second coat, allowing the first to dry completely.

Make sure you are applying an adequate coat of paint. A second coat is usually required. Ensure that you are using the correct application method (brush, roller, or spray) and that the surface has been properly prepared.

Ensure adequate ventilation and appropriate room temperature. Check that the surface is clean, dry and free of any contaminants that might affect drying time.