Best current price£1.95from DIY Refurb UK
Shopping.co.uk recommended and popular offers
DIY Refurb UK£1.95Visit shop Littlefair's Wood Finishing Products Grain Littlefairs Water Based Wood Stains - Non Toxic & Eco Friendly
Visit shop
B&Q£3.95Visit shop B&Q - Wood Stain Water-BasedChristmas Red15Ml Tester PotLittlefair's
Visit shop23 offers from £1.95 - £29.95
View price history by clicking the chart icon.
Littlefair's Indoor Wood Stain is designed for DIY enthusiasts and woodworkers looking to achieve a professional, aged aesthetic on bare timber surfaces. Its primary benefit is a water-based, eco-friendly formula that deeply penetrates wood grain to provide rich color without toxic fumes; however, it is strictly intended for raw, sanded wood and will not adhere to surfaces with existing varnish or wax coatings.
| Colour | Red |
|---|---|
| Model Part Number | VRM-15ML |
| Brand | Littlefair's |
No, this product is specifically formulated for indoor use and does not contain the weather-resistant additives required for outdoor environments.
Yes, the wood must be bare and sanded to allow the stain to penetrate; otherwise, the stain will fail to absorb.
A standard synthetic paintbrush or a clean, lint-free cotton cloth works best for even coverage.
While the product is non-toxic and low-odor, ensure that you apply a child-safe, non-toxic sealant over the stain if the item will be handled frequently by young children.
While you can experiment, it is recommended to test on a scrap piece of the same wood type first to ensure you achieve the desired shade.
Simply rinse your brushes thoroughly under warm, running water until the water runs clear.
The wood is likely sealed or varnished. You must strip and sand the surface back to raw wood before the stain can penetrate.
This is often caused by inconsistent sanding. Sand the wood more evenly and ensure you are removing excess stain with a clean cloth immediately after application.
Water-based products can raise wood fibers. Lightly sand the surface with high-grit sandpaper (240+) once the first coat is fully dry.
Before starting, ensure the wood is completely stripped of any old paint, wax, or varnish, as the stain requires direct contact with raw wood fibers to function. Sand your project progressively up to 120-150 grit for an even finish. Shake the bottle well before use. Apply the dye liberally and wipe away any excess that does not soak in after a few minutes to prevent streaking. For care, keep the container tightly sealed in a cool, dry place away from frost. Once the wood is fully dried, you may apply a clear wax or lacquer topcoat if extra protection against spills or scratches is needed.
