Best current price£1.95from DIY Refurb UK
Shopping.co.uk recommended and popular offers
DIY Refurb UK£1.95Visit shop Littlefair's Wood Finishing Products Grain Littlefairs Water Based Wood Stains - Non Toxic & Eco Friendly
Visit shop
B&Q£3.95Visit shop B&Q - Wood Stain Water-BasedEnglish Oak15Ml Tester PotLittlefair's
Visit shop24 offers from £1.95 - £32.99
View price history by clicking the chart icon.
2 offers from £8.89 - £8.99
View price history by clicking the chart icon.
Littlefair's Indoor Wood Stain is designed for DIY enthusiasts and woodworkers looking to achieve an authentic, aged aesthetic on interior timber surfaces like furniture, doors, and architraves. The water-based formula penetrates deeply into the wood grain for a rich, professional-grade finish, though users should note that application requires careful preparation to ensure uniform color absorption.
| Colour | Brown |
|---|---|
| Model Part Number | EO-25LTR |
| Brand | Littlefair's |
No, this product is specifically formulated for indoor use and does not contain the UV or weather-resistant properties required for outdoor timber.
Yes, proper surface preparation including sanding is essential to ensure the stain absorbs evenly into the wood fibers.
Yes, wood stain provides the color, but it does not provide physical protection. We recommend finishing with a wax, oil, or varnish to seal the wood.
Because this is a water-based stain, simply wash your brushes in warm, soapy water immediately after application.
While the formula is designed to be used as is, users sometimes experiment by blending colors, but always test the mixture on a scrap piece first.
This is usually caused by inadequate sanding or uneven absorption. Lightly sand the area and ensure the surface is clean before applying another thin, even coat.
Water-based stains can cause wood fibers to swell. Use a very fine-grit sanding pad to gently smooth the surface between coats.
Wipe the surface with a damp cloth immediately after application to remove excess stain, or dilute the stain slightly with a small amount of water if necessary.
Before application, ensure the wood surface is clean, dry, and free from wax, polish, or previous finishes. Sanding the surface with fine-grit sandpaper (120-180 grit) is recommended to open the wood pores and ensure even penetration. Always perform a patch test on an inconspicuous area or a scrap piece of the same wood type to confirm the final color. After staining, the wood will require a protective topcoat, such as a wax, oil, or varnish, to protect the finish from wear and moisture. Clean all brushes and tools immediately after use with warm, soapy water.
