Regatta Birchdale II Waterproof Jacket - Purple

Isotex 15000 is a waterproof and breathable fabric technology. The '15000' rating indicates its hydrostatic head, meaning it can withstand water pressure equivalent to 15,000mm of water before leaking. It also allows 15,000g of moisture vapor to pass through per square meter per 24 hours, signifying good breathability.

The jacket provides excellent waterproof and windproof protection, but its primary insulation comes from the layers worn underneath. For very cold conditions, layering with a fleece or insulated mid-layer is recommended.

Machine wash on a gentle cycle at 40°C with a mild liquid detergent. Rinse thoroughly and hang to air dry. Do not use fabric softener or bleach.

No, do not tumble dry the jacket. Air drying away from direct heat is recommended to preserve the fabric's waterproof and breathable properties.

The frequency depends on usage and care. Generally, if water no longer beads up on the surface of the fabric, it is time to re-apply the DWR finish. This might be after several washes or extended use in wet conditions.

Taped seams means that the stitching lines where fabric pieces are joined are covered with a special waterproof tape. This prevents water from leaking through the tiny holes made by the sewing needle.

It is ideal for walking, hiking, camping, travel, and general outdoor activities where protection from rain and wind is needed, along with the ability to move freely.

The Durable Water Repellent (DWR) finish may need to be reapplied. Follow the instructions on a suitable re-proofing product (wash-in or spray) and ensure the jacket is clean before application. Wash the jacket according to care instructions and air dry.

Ensure the taped seams are intact and clean. If the tape appears damaged, repair may be difficult. Clean the area gently with mild soap and water.

This can be due to a lack of breathability. Ensure the vents (if any) are open and that you are not overheating due to excessive layering. Check that the fabric is clean, as dirt can clog pores and reduce breathability. Wash according to care instructions.

Clean the zipper teeth gently with a soft brush and water. Apply a small amount of graphite (from a pencil) or a specialized zipper lubricant to the teeth. Avoid force, which can damage the zipper.