Johnstone's Trade Woodworks Satin Woodstain - 5 L - Mahogany

It is suitable for smooth timber joinery such as doors, windows, fascia boards, cladding and garden furniture.

Generally, two coats are recommended, but this can vary depending on the wood and desired finish. Always follow the product label instructions.

Drying times vary depending on conditions. Refer to the product label for specific drying times, usually a few hours between coats.

No. The existing varnish needs to be rubbed down with fine waterproof abrasive paper, rinsed, and allowed to dry. The woodstain should be applied to the bare wood.

Clean tools immediately after use with White Spirit.

Yes, it is suitable for both interior and exterior wood.

It is available in ready-mixed colors including clear, light oak, antique pine, redwood, walnut, mahogany, medium oak, jacobean oak, teak, ebony, pine and rosewood.

Ensure even application, avoid overloading the brush, and work in the direction of the wood grain. Multiple thin coats are better than one thick coat.

Check the room temperature and ventilation. Ensure the surface is clean and free of contaminants. Allow sufficient drying time between coats.

Test the stain on a hidden area first. The final color can be affected by the wood type and the number of coats applied.

Ensure the surface is completely dry and free of moisture before application. Sand the surface lightly and reapply.