Johnstone's Storm Shield Masonry Paint - County Cream
Not Available
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This guide is for homeowners and DIY enthusiasts looking to protect their exterior walls with a durable, long-lasting paint. Johnstone's Storm Shield Masonry Paint in County Cream offers excellent protection against the elements and resists stains. Note that proper surface preparation is key for optimal performance.
All features
| Colour | Cream |
|---|---|
| Brand | Johnstone's |
Extended Product Information
FAQs
How long does the paint take to dry?
The paint is rain-resistant in approximately 20 minutes. Recoat time is typically 2-4 hours, but always refer to the product label for specific instructions.
How much paint will I need?
Coverage varies depending on the surface and application method. Refer to the product label for coverage information per litre. Generally, two coats are recommended.
Can I apply this paint in cold weather?
It is best to apply the paint in temperatures between 10°C and 25°C. Avoid painting in freezing conditions.
What is the expected lifespan of this paint?
The paint has a 15-year life expectancy when applied correctly.
Do I need to prime the surface before painting?
Priming is recommended on porous surfaces or when significant colour change is required. Consult the product label for specific instructions.
How do I clean my paintbrushes and rollers?
Clean tools with water immediately after use.
Troubleshooting
Paint is peeling or flaking.
Ensure the surface was properly prepared before painting. Remove loose paint, clean the surface, and reapply the paint following the instructions.
Paint is not adhering properly.
Ensure the surface is clean, dry, and free of contaminants. Use a suitable primer if required. Check for adverse weather conditions during application.
Colour is not consistent.
Stir the paint thoroughly before and during application. Apply an even coat and avoid excessive thinning. Ensure two coats are applied for consistent colour.
Pros and Cons
Pros
- Long-lasting protection against weather and the elements.
- Quick rain resistance, minimizing disruption.
- Easy to clean and maintain, resisting dirt and stains.
- Provides a smooth, attractive finish.
- Backed by a 15-year life expectancy.
Cons
- Requires proper surface preparation for optimal adhesion.
- May require multiple coats for complete coverage depending on the existing colour.
- Colour choice is limited to County Cream.
- Can be more expensive than some other masonry paints.
Setup, Compatibility & Care
Setup:
- Surface Preparation: Clean the masonry surface thoroughly. Remove any loose paint, dirt, or mildew. Use a suitable primer if necessary.
- Application: Apply two coats of Johnstone's Storm Shield Masonry Paint, allowing sufficient drying time between coats.
- Tools: Use a brush, roller, or sprayer.
Compatibility:
- Suitable for use on most exterior masonry surfaces, including brick, concrete, render, and stone.
- Compatible with most exterior primers.
Care:
- Wash the painted surface with a mild detergent and water to remove dirt and stains.
- Avoid using abrasive cleaners or scrubbing brushes that could damage the paint film.