Johnstone's Trade Heavy Duty Yacht Varnish Gloss Clear - 750ml

The surface should be clean, dry, and free from any previous coatings. Sand the surface to create a smooth finish.

Apply multiple thin coats, typically two or three, depending on the timber and desired finish. Always allow each coat to dry completely before applying the next.

Yes, this varnish is suitable for marine environments and is designed to provide excellent protection against the elements.

Coverage is approximately 14-16 m²/litre.

Clean brushes, rollers, and spray guns immediately after use with the appropriate solvent, as specified by the manufacturer.

Drying times vary depending on environmental conditions. Refer to the product label for specific drying times. Generally, allow several hours between coats.

Store the varnish in a cool, dry place away from direct sunlight and heat. Ensure the container is tightly sealed to prevent the varnish from drying out.

Ensure adequate ventilation and that the temperature is within the recommended range. Check that the previous coat is fully dry before applying the next.

Ensure the varnish is applied in thin, even coats and that the wood surface is properly prepared.

Apply thinner coats and avoid over application. Ensure the application method is correct.

Ensure the varnish is thoroughly mixed before application and apply multiple coats.