Ft Paints Water-Based Polyurethane Paint For Structural Components - Ral 1003-Signal Yellow
Not Available
Currently unavailable
Currently out of stock
This product is not available at the moment. Check back later.
Product Information
Full details
This RT 2K PU Topcoat from FabioT. is designed for professionals seeking a durable, high-performance finish for vehicles, machinery, and metal structures. It offers superior resistance to mechanical stress, chemicals, UV, and weather, with a semi-gloss finish. A potential caveat is its 7-8 day full curing time, requiring patience for maximum durability.
All features
| Colour | Yellow |
|---|---|
| Model Part Number | RT 2K PU Topcoat |
| Brand | FT Paints |
Extended Product Information
FAQs
What is the shelf life of the RT 2K PU Topcoat?
The shelf life typically depends on storage conditions. Please refer to the product's technical data sheet for specific details and recommended storage temperatures.
Can this coating be applied with a brush or roller?
While primarily designed for spray application, brush or roller application may be possible for small areas or touch-ups. However, achieving a uniform finish comparable to spraying can be challenging. Always test on a small, inconspicuous area first.
What is the correct mixing ratio for the hardener and thinner?
The exact mixing ratio for hardener and thinner is critical for performance. Consult the product's Technical Data Sheet (TDS) or the product label for the precise ratio for the 5.50 L kit (3.65 L Paint, 0.91 L Hardener, 0.94 L Thinner).
How long does it take for the coating to reach full hardness?
The coating will be dust-dry in approximately 1 to 1.5 hours, but it requires 7 to 8 days to reach its full mechanical and chemical resistance properties.
Is this product suitable for automotive refinishing?
Yes, the RT 2K PU Topcoat is engineered for vehicles, offering excellent protection and a semi-gloss finish suitable for automotive applications requiring high durability.
What is the recommended temperature range for application?
For optimal performance, it's recommended to apply the coating within a temperature range of 10°C to 30°C (50°F to 86°F) and with relative humidity below 75%. Always check the specific product data sheet for precise guidelines.
Can I recoat the surface after the full cure time?
Yes, the surface can be recoated after the full cure time. For best adhesion, light abrasion of the cured surface might be recommended before applying subsequent coats, depending on the specific system and intercoat adhesion requirements. Refer to the manufacturer's guidelines.
Troubleshooting
Coating not drying properly
Ensure correct mixing ratios of paint and hardener. Verify ambient temperature and humidity are within recommended application range. Check for inadequate ventilation.
Poor adhesion to substrate
Confirm the surface was properly prepared and cleaned. Ensure compatibility with the primer used. Re-prime if necessary with a compatible WEP primer.
Uneven finish or runs
Adjust spray gun settings (pressure, tip size) and technique. Reduce applied film thickness per coat. Ensure proper thinning if required.
Reduced chemical resistance
Verify the product has been allowed to cure fully for 7-8 days. Ensure correct 2K mixing ratios were used during application.
Pros and Cons
Pros
- Excellent durability for high-stress applications.
- Superior resistance to chemicals, scratches, UV, and weather.
- Fast dust-dry time speeds up application process.
- Suitable for a wide range of demanding environments.
- Provides a professional semi-gloss aesthetic finish.
Cons
- Full curing takes 7-8 days, requiring a waiting period for maximum durability.
- Requires proper mixing of 2K components for optimal performance.
- Waterborne formula may have specific application temperature requirements.
- Requires compatible WEP primers for best results.
Setup, Compatibility & Care
Setup: The RT 2K PU Topcoat is a two-component (2K) system. Ensure proper mixing ratios of the paint, hardener, and thinner as specified by FabioT. for optimal performance. Stir thoroughly before application.
Compatibility: This coating is designed to be compatible with WEP Primers for maximum adhesion. Ensure the substrate is clean, dry, and free from contaminants. Not recommended for use over incompatible primer systems.
Application: Apply using conventional spray equipment. Maintain consistent application thickness for best results. Optimal application temperature and humidity ranges should be observed as per manufacturer guidelines.
Care: Coated surfaces should be cleaned using mild detergents and water. Avoid abrasive cleaners or solvents that could damage the finish. Regular cleaning will help maintain the protective qualities and appearance of the coating.