Setup, Compatibility & Care
Preparation is key for optimal performance.
- Bare Wood: Lightly sand with 120 grit sandpaper.
- Previously Painted Surfaces (Good Condition): Lightly sand with 240 grit sandpaper.
- Previously Painted Surfaces (Flaking): Sand back to bare wood using 120 grit sandpaper.
- Cleaning: Ensure the surface is clean and free from dust and grease after sanding.
Application:
- Stir the paint thoroughly before use.
- Apply using a synthetic brush, following the direction of the woodgrain.
- Ensure room temperature is above 10°C and adequate ventilation is provided during application and drying.
Compatibility:
- Suitable for furniture, doors, and cupboards.
Care:
- Clean with a damp cloth. Avoid abrasive cleaners.