Ronseal Chalky Furniture Paint - Vintage White 750ml

No, Ronseal Chalky Furniture Paint is designed to provide a durable finish on its own and does not require a separate wax or lacquer.

This paint is suitable for interior furniture, doors, and cupboards. It works best on prepared wood and previously painted surfaces.

The paint is touch dry in 30 minutes. You can recoat after 30 minutes, but allow 4 hours between the first and second coat for optimal results.

You should apply the paint in a room that is warm and above 10°C.

For bare wood, sand with 120 grit sandpaper and wipe with white spirit. For painted wood in good condition, lightly sand with 240 grit. For flaking paint, sand back to bare wood and clean.

One litre of Ronseal Chalky Furniture Paint covers approximately 16 m².

This product is primarily designed for wood and previously painted surfaces. Performance on metal or plastic may vary and is not guaranteed.

Ensure the surface was properly prepared by sanding and cleaning. For painted surfaces, ensure a light sanding was done to create a key for the paint to adhere to. Check that the temperature is above 10°C during application and drying.

Stir the paint thoroughly before and during application. Use a good quality synthetic brush and apply paint in the direction of the woodgrain, avoiding overworking the paint. Ensure even coats are applied.

Confirm that the room temperature is above 10°C. High humidity can also slow drying times. Ensure adequate ventilation by opening windows or doors.

Ensure two coats have been applied as recommended. The chalky finish develops as the paint dries. If the surface was previously very glossy, a more thorough sanding might be required for optimal adherence and finish.