Ronseal Chalky Furniture Paint - English Rose - 750ml

Ronseal Chalky Furniture Paint provides a chalky, flat matt finish for furniture, doors, and cupbo...

Best current price£20.78from B&Q

Colour

All Offers

3 offers from £20.78 - £22.82

View price history by clicking the chart icon.

B&QB&Q - One Coat Chalky Furniture Paint 750Ml English Rose
Free delivery in 1–3 days
£20.78
Visit shop
OnBuy.comRonseal Rslcfper750 750 Ml Chalky Furniture Paint - English Rose
Free delivery in 1–3 days
£22.82
Visit shop

Product Information

Full details

Ronseal Chalky Furniture Paint is designed for DIY enthusiasts and homeowners looking to easily update furniture, doors, and cupboards with a durable, flat matt, chalky finish. Its key benefit is the 'no-prep' finish requiring no waxing, buffing, or lacquering for protection, offering a quick transformation for upcycling projects or a color refresh. A potential caveat is the requirement for specific room temperatures and adequate ventilation during application and drying.

All features

ColourPink
Model Part NumberRSLCFPER750
BrandRonseal

Extended Product Information

FAQs

Do I need to use a primer with this paint?

No, this paint is designed to be used without a primer on most suitable surfaces.

How do I prepare bare wood before painting?

Sand bare wood with 120 grit sandpaper along the wood grain until smooth. Wipe away dust with white spirit and a cloth.

Can I use this paint on metal or plastic?

This paint is primarily designed for wood surfaces. Compatibility with metal or plastic may vary and a test patch is recommended.

How long does the paint take to fully cure?

The paint is touch dry in 30 minutes. While it offers protection against knocks and scuffs after recoating, full hardness and durability develop over several days to a week.

What is the coverage rate?

The paint covers approximately 16 m² per litre.

Can I use this paint on exterior furniture?

Ronseal Chalky Furniture Paint is intended for interior use only. It is not formulated for exterior conditions.

How many coats are recommended?

Two coats are generally recommended for best results and full coverage.

Troubleshooting

Paint is not adhering well

Ensure the surface was properly prepared (sanded and cleaned) and free from dust or grease. Check that the room temperature is above 10°C.

Uneven finish or brush marks

Apply paint evenly with a good quality synthetic brush, following the direction of the wood grain. Avoid overworking the paint. Ensure consistent application pressure.

Paint is drying too quickly, causing drag

Work in smaller sections and ensure adequate ventilation but avoid direct drafts or excessive heat which can speed up drying excessively.

Surface feels sticky after drying

Ensure the paint has been applied in a well-ventilated area and the recommended drying times have been met. If still sticky, a further thin coat or longer drying period may be needed.

Pros and Cons

Pros

  • Achieves a desirable chalky finish without additional protective coats.
  • Fast drying and recoating times speed up projects.
  • Good coverage rate reduces paint usage.
  • Simplified preparation steps, often avoiding primer.
  • Versatile for upcycling and color changes on furniture and doors.

Cons

  • Requires a minimum room temperature of 10°C.
  • Adequate ventilation is necessary during use and drying.
  • Best results may require two coats for full opacity.
  • Bare wood preparation involves sanding and cleaning.

Setup, Compatibility & Care

Setup & Application

  • Surface Preparation: For bare wood, sand with 120 grit sandpaper along the grain and clean with white spirit. For previously painted wood in good condition, lightly sand with 240 grit sandpaper. If the paint is flaking, sand back to bare wood and clean.
  • Stirring: Thoroughly stir the paint before and during use.
  • Application: Apply using a synthetic brush, working in the direction of the wood grain.
  • Environment: Ensure room temperature is above 10°C and maintain good ventilation.

Compatibility

  • Suitable for furniture, doors, and cupboards.
  • Ideal for bare or previously painted wood surfaces.

Care

  • Clean application tools with water immediately after use.
  • Wipe the painted surface with a damp cloth for cleaning. Avoid abrasive cleaners.

Price History

DatePrice
Visit shop