Everbuild High Performance Wood Filler - Oak - 500G

The filler sets hard in approximately 30 minutes, allowing it to be drilled, carved, or planed once dry.

Yes, it is designed for both exterior and interior use and is completely weatherproof once dry.

Unused filler and hardener should be stored in their original, tightly sealed containers in a cool, dry place. Refer to the product packaging for specific expiry dates if available.

Yes, once the filler is fully cured, it can be painted, varnished, stained, or otherwise decorated.

Tools should be cleaned with water immediately after use before the filler has hardened.

It is available in two sizes: 500g and 1.4kg.

Yes, it is available in a variety of colours to help match different wood tones, including Oak, Pine, and Redwood.

Ensure you have used equal parts of filler and hardener and mixed them thoroughly. Check that the hardener has not expired or been stored improperly.

This can happen if the mixture is exposed to air for too long or if the ambient temperature is very high. Work in smaller batches and in a cooler environment if possible. Ensure the hardener is not contaminated.

Make sure the wood surface was clean, dry, and free of dust, grease, or paint before application. Sanding the surface lightly beforehand can improve adhesion.

Deep or large voids may require filling in multiple layers, allowing each layer to set partially before applying the next. Ensure accurate mixing ratios.